John Benedict wrote:Well I don't know if you need to do this one NOW but I HOPE it will be a cool effect as I have spent about 3 hours trying to figure it out.3 colors, 16 channels each, interleaved, ie b,g,w.
Lighting half the tree blue and half green and then advancing the channels to create the effect of the two halves rotating. Sounds easy huh? I been through a half a bottle of wine before I got it to look right. The devil for me was in the repeat and then to incorporate the white into the spin and fade the other color? Threw away the cork to the wine at that point as I didn't see a need for it afterwards. For now I stayed with just the two colors.
OK...to make sure I've got this...you want basically a Ying/yang with two colors (not white)...and the white to do something over top of it?
I think this will be pretty easy....although you'll have to do it in stages...I'll put together the ying/yang as a new pattern, then you can make a white pattern of your choice and use the transparent paste to add it over top of your 2 color rotate...
The code's not really built for multi-stage patterns (yet, wait for 2010 for that ;)) ...so you'll have to build them on your own using the opaque and transparent pastes with vixen...
I'll build the ying-yang next (probably tomorrow...but no promises)...
now where's that Vex remote....
-David
dgirard wrote:OK...to make sure I've got this...you want basically a Ying/yang with two colors (not white)...and the white to do something over top of it?I think this will be pretty easy....although you'll have to do it in stages...I'll put together the ying/yang as a new pattern, then you can make a white pattern of your choice and use the transparent paste to add it over top of your 2 color rotate...
The code's not really built for multi-stage patterns (yet, wait for 2010 for that ;)) ...so you'll have to build them on your own using the opaque and transparent pastes with vixen...
I'll build the ying-yang next (probably tomorrow...but no promises)...
now where's that Vex remote....
-David
You have it right-a ying yang. The white was just a transition from one of the other colors. Example as the blue advances it goes out and the white advances into the position as the new ying. But hey a two color is still VERY appreciated! WOW
John Benedict wrote:You have it right-a ying yang.
Minor correction... it's a Yin Yang. It's a Chinese Tai-Chi symbol of unity and duality. But there's only one 'g'.
Conversely, a Ying Yang is slang for an inept person.
(my Asian children set me straight on this a long time ago...) 😉
dirknerkle wrote:Minor correction... it's a Yin Yang. It's a Chinese Tai-Chi symbol of unity and duality. But there's only one 'g'.Conversely, a Ying Yang is slang for an inept person.
(my Asian children set me straight on this a long time ago...) 😉
Obviously... 😀
Here's 1.1 of the config maker with the new color patterns...
Hi:
Oboy, I think I found another problem. Version 3.2b--Vixen 2.5.0.7. If I generate a 32 channel pattern;
8-White
8-Red
8-Green
8-Blue
Interleaved colors.
The blue does not show up in the display and only 30 channels in the sequence itself, and always starts at channel 3 when pasting into Vixen.
It seems I read something about this earlier, but I can't seem to find it now.
Thanks
Idun
