EDM Buzzing
 
Notifications
Clear all

EDM Buzzing

28 Posts
7 Users
0 Reactions
10.7 K Views
Posts: 259
(@cmschleich)
Reputable Member
Joined: 11 years ago
reelpilot wrote:I heard back from EDM and they said that my transmitter checked out normally and they were using my power supply and antenna that I sent in with the unit. They even attached an audio clip of the EDM in which they indicated, "during the silent pieces where audio was muted to the EDM, you can only hear the normal system noise floor." So apparently the buzzing that I am hearing is what they attribute to normal noise. At a low volume level that noise is not very noticeable, but at moderate and higher volumes, it does become quite noticeable when the music has quieter moments. Their suggestion is to use an external antenna such as the j pole and get the transmission away from the EDM. http://www.jpole-antenna.com/shop/low-power-fm-lpfm-broadcast-antenna/

Thanks for the update, I'm tying my boat to yours, our conditions sound exactly the same and they've sent me down the same troubleshooting path starting with removing the RDS chip. That's kind of disappointing for how much it costs, I chose to spend extra $ for the quality, looks wise it seems awesome. But I do not consider the base level of noise insignificant, I agree with music on it's not noticeable, with music off it's bothersome. It enough to sound like a power supply problem, but I too tried a 12VDC batter.

I wonder if that's why Matt Johnson put an audio mixer in front of his? In his video he says he does it to keep nice levels for people in their cars, or something vague like that. I don't know if that would clean up a base level of noise though?


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Given the cost, that seems like a rather unacceptable answer.

It seems the quest for a high quality transmitter at a good price is still underway.

reelpilot wrote:I heard back from EDM and they said that my transmitter checked out normally and they were using my power supply and antenna that I sent in with the unit. They even attached an audio clip of the EDM in which they indicated, "during the silent pieces where audio was muted to the EDM, you can only hear the normal system noise floor." So apparently the buzzing that I am hearing is what they attribute to normal noise. At a low volume level that noise is not very noticeable, but at moderate and higher volumes, it does become quite noticeable when the music has quieter moments. Their suggestion is to use an external antenna such as the j pole and get the transmission away from the EDM. http://www.jpole-antenna.com/shop/low-power-fm-lpfm-broadcast-antenna/

Reply
Posts: 215
Topic starter
(@reelpilot)
Reputable Member
Joined: 12 years ago
ukewarrior wrote:Given the cost, that seems like a rather unacceptable answer.

I agree completely. It would be one thing if it was half the cost, but for nearly $300 I expected better. This is the email I received from EDM tonight.

Hi,

What often confuses users is that if you get RF feedback into the system by
the antenna radiating back into the unit, it sounds like a mains frequency
buzz.
That is the reason that it does not disappear even if the unit is operated
from a battery.

So if repositioning the antenna and lowering the TX power does not eliminate
the interference, the cure is often to use a remote antenna coupled via a
coax cable.
This remedy has worked for people that had RF reflection's problems causing
interference. It can also have a lot to do with the building structure (type
of material that can reflect RF) around the transmitter.

Users who reported back to us in almost all cases could eliminate this RF
buzz by using a remote antenna.

Regards, EDM Sales


Reply
navyav8tr
Posts: 229
(@navyav8tr)
Reputable Member
Joined: 13 years ago

You know I thought I was losing my mind with my EDM. I have had the same buzzing sound and this will be my fourth year using it. I have tried the ferrite cores etc. to no avail.

More than likely I will probably just order a new FM transmitter and move on. Not that I am glad that you are having issues but I kept hearing about how great the EDM was and in the back of my mind I was like, mine kind of sucks.

Good luck.


Reply
Posts: 259
(@cmschleich)
Reputable Member
Joined: 11 years ago

My hum sort of does sound like a "mains frequency". Sounds more worthy of a try than some of the other steps. Going to take me a bit to get to that as I have a year one size to do list and nothing on hand. Anybody else have the equipment now to do such a test?

reelpilot wrote:I agree completely. It would be one thing if it was half the cost, but for nearly $300 I expected better. This is the email I received from EDM tonight.

Hi,

What often confuses users is that if you get RF feedback into the system by
the antenna radiating back into the unit, it sounds like a mains frequency
buzz.
That is the reason that it does not disappear even if the unit is operated
from a battery.

So if repositioning the antenna and lowering the TX power does not eliminate
the interference, the cure is often to use a remote antenna coupled via a
coax cable.
This remedy has worked for people that had RF reflection's problems causing
interference. It can also have a lot to do with the building structure (type
of material that can reflect RF) around the transmitter.

Users who reported back to us in almost all cases could eliminate this RF
buzz by using a remote antenna.

Regards, EDM Sales

Sent from my iPhone using Tapatalk


Reply
Page 3 / 6
Share: