Has anyone used the rectangle nodes for window frames? I currently have technicolor c7s on them but wanted to try a different look.
Sent from my iPhone using Tapatalk
I've been wondering the same. Used the strips and have to say very disappointed with those. 16 1/2 feet of disappointment. I'll be following this one.
I used them around my lower winows this year . I mounted them into 1/2 x 1/2 welded wire mesh @ 2.5 inch spacing and used a zip tie between each pixel for the ( looped ) excess wire .
I wanted an easy way to install these and have them uniform, so I use 1.5" in width of the welded wire for each strand/side of the window .
I pressed the nodes into the center 1/2 x 1/2 which left the outside 1/2 x 1/2 to use as hangers or mounts .
A couple of nails top bottom and sides made simple work for this method .
angus40 wrote:I used them around my lower winows this year . I mounted them into 1/2 x 1/2 welded wire mesh @ 2.5 inch spacing and used a zip tie between each pixel for the ( looped ) excess wire .I wanted an easy way to install these and have them uniform, so I use 1.5" in width of the welded wire for each strand/side of the window .
I pressed the nodes into the center 1/2 x 1/2 which left the outside 1/2 x 1/2 to use as hangers or mounts .
A couple of nails top bottom and sides made simple work for this method .
Sorry Angus I meant the rectangle nodes that have 3 5050 leds in them. These 
Sent from my iPhone using Tapatalk
deanathpc wrote:I've been wondering the same. Used the strips and have to say very disappointed with those. 16 1/2 feet of disappointment. I'll be following this one.
Curious to know why you didn't like the look?. I've heard others say they were disappointed in strips in certain applications.
OregonLights wrote:Curious to know why you didn't like the look?. I've heard others say they were disappointed in strips in certain applications.
Sorry I guess I didn't finish that thought. The look was fine. Intense in fact.
The weather proofing on the other hand not so good. Many repairs needed now and no longer weather proof.
No worries . those kinda look like a pixel modules of a sort with each pixel in their own plastic container .
It might be tough to get those in line around windows/doors. Seems like if the square got off with the next one a little bit it would throw the whole line off. It is a unique look though which I like. I'll be following this thread.
Yea keeping those inline is going to require some work. Maybe something like C channel that is used for vinyl might work for them? At least it would keep them aligned better.
They have mounting holes. Mark a center line on some PVC and screw them into it.
-joni-

