Last year was my first year with blinky flashy. Everything worked and was very cool, but I had some lights framing my windows and eaves on the house that I wasn't happy with. I would like them to sit straighter and sturdier ( and also hang easier). I'm thinking i should create PVC frames for each window, and perhaps some long straight runs for the eaves lining the roof. I'm curious what others do to keep things nice and straight while mounting on the house... Is PVC a good idea? Thanks for any advice.
first year for me this year but the pvc window and door frames work nicely. still trying to figure out the eaves also, so no help there. I used 1/2 pvc and glued the frames together, then painted them to match the existing window or door frame so most of it will blend in. (really starting to like Krylon Fusion paint--stuff really sticks to pvc!)
This is how Im mounting strips to my house.
http://doityourselfchristmas.com/forums/showthread.php?19558-Mounting-tips-for-5050-rgb-felx-strips&p=222578#post222578
This can be used for other applications also. you can drill through them and have your lights spaced evenly.
Another Application, I will be using the same J channel for my Icicle Lights. I will be using the holes to secure the lights to the track.

last year was my first year, and I made window Frames out of metal adjustable shelf brackets, got them at Home Depot, I cut them to fit my windows and drilled holes in the corners for screws, they have the square holes already in them, I wrapped them with garlind W/ white lights and added green and red, the holes worked great fro zip ties, then I put two down the middle of the square and attached a wreath to each one with RGW lights. after christmas I just took them out and put them away for this year, now I just plug them in.
Last year I simply used black tape to secure them to 3/4" PVC added some medium sized screw-in eyelets (about 6' apart) and hung them from hooks screwed into the eves. Could have used white electrical tape but had just bought a 10 pack of black and wanted to get it done. I think if I did it again I would use red tape for a candy cane effect and be more careful about the spacing but it's over a hundred feet to the curb so my uneven black tape wasn't noticed by anyone but me. I also made frames of 3/4" PVC to fit my windows and handrail and then taped the pixels to those. The best part of this was that it took less than a half hour to take down over 600 Pixels on about 190' of PVC and should only take that amount of time to put them back up. I hope to get a chance to put them up this week and if I do I'll include a few pictures of them hanging.
If you want to see them lit check out this video. (In case your wondering they are the lights on the house & attached garage eves and the 3 house windows and they are being lit in groups of three in this video)
Here's a few pictures of them just itching to get hung this week.


