PropController Ethe...
 
Notifications
Clear all

PropController Ethernet - Construction question

31 Posts
8 Users
0 Reactions
17.6 K Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#15359]

Ben,
I want to check Q1.
I think your PWB footprint is wrong.

I think pins 2 and 3 are swapped. On the PWB pin2 and connected to ground.

Prop Q1

30 Replies
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Ahhh interesting, it looks like the text labels in the schematic are wrong. The collector, emitter, and base are all correct but the drawing isn't representing the pin assignments correctly.


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

My PCB works as soldered, matching the footprint on the PCB (some transistors can be made backwards though.)


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
chilloutdocdoc wrote:My PCB works as soldered, matching the footprint on the PCB (some transistors can be made backwards though.)

Well yes it will still work. Q1 configuration in the schematic is a "Common Emitter". If you fit Q1 as per the PWB overlay, Q1 configuration becomes a "Common Base". the sneaky thing is both will work, albeit with different characteristics.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

This is just a text issue on the schematic, the PCB is correct.


Reply
Page 1 / 7
Share: