I am in need of 1000' of SPT1 wire. After looking around I found 18AWG speaker wire for about half the price. http://www.amazon.com/METRA-S18-1000-Gauge-Clear-Speaker/dp/B00029X22M
Has anybody tried to use speaker wire or something besides SPT1 wire in an outdoor setting? I realize that the difference is in the insulation. Would I just be asking for trouble?
If SPT wire is THE way to go, any recommendation on a cheap place to buy from?
This keeps coming up and while the gauge of the wire may be the same, the insulation of the wire is not and is not rated to provide the appropriate protection thatn SP1 or Sp2 wire does.
Some DIYers have been successful in using speaker wire, but as it does not have the proper rating to carry 120vac, should you have a fire or other disaster caused by using wire that is not approved for that purpose, you could very well land in some hot water legally and/or financially and your homeowner's insurance may not cover it either.
SP1 isn't hard to find -- most any HD or Lowe's has spools of the stuff in stock just about all the time. It's a much safer way to go and the added protection it offers is rather worth the extra $20 it might cost.
LedHoldiayLighting carries Green at a pretty good price. Or check Skycraft Surplusif you want Brown. CDI if you want White. Lowes and HD do carry it as well, usually in 250' rolls, but it will probably cost a bit more if you buy it there. Depends on how much you need and how quick you need it.
Skycraft seems to have the best price right now at $0.08 per foot for 1000', only $0.001 more expensive than that speaker wire and it is SP-1, I'm guessing that means SPT-1, So it is safer. A very small price to pay.
I bought some SPT-1 from CDI last year and was very happy with it. I know that the SPT-1 wire from CDI is also weather coated and similar if not the same to what light manufacturers use. I am not sure about how the skycraft will hold up let alone the wire that ledholidaylighting has.
Penfold wrote:I bought some SPT-1 from CDI last year and was very happy with it. I know that the SPT-1 wire from CDI is also weather coated and similar if not the same to what light manufacturers use. I am not sure about how the skycraft will hold up let alone the wire that ledholidaylighting has.
Skycraft has held up well.. granted i used it for 1 season, Florida Rain and Sun didn't have any issues, i've got a few bits of it outside now to test it in a year-round situation.
The other factor beside the current rating, you must also take into consideration the voltage rating of the insulation, this is what will get you into trouble for safety.
Speaker wire insulation is rated around 100 volts or less. Look at the labels on the roll.
SPT wire will have a rating of 300 volts or more. The reason is 120 Vac is not the true voltage.
Actually the peak voltage is 1.414 times the 120 Vac, that gives you about 170 Volts peak. Now for safety you want something better for insulation than speakers wire. As close as you can the insulation should be about double the voltage you will be using, so 300 volt insulation should be your minimum rating of your wire.
