cutting down mini s...
 
Notifications
Clear all

cutting down mini strings

14 Posts
8 Users
0 Reactions
6,494 Views
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
gizmo wrote:thank you everything makes sence. now to find low count strings in red and green. it seams a lot easier

I have not seen 20 ct. colored bulbs, but maybe they exist.

However, you could paint them. There are a couple of threads about painting clear bulbs:

Paint clear bulbs
changing clear bulbs to red , blue , or green

I've used the Metalcast spray paint on 20 ct. strings and it turned out well. Here is an example - the fireplace arch consists of 5 20 ct. strings that I sprayed with red. There was a slight difference in color compared to the pre-painted red mini-lights I used. I should probably have started with clear minis on the rest of the fireplace and painted them also, so they would match exactly.

don


Reply
Posts: 568
Topic starter
(@gizmo)
Prominent Member
Joined: 19 years ago

thanks R for the rope light idea i will have to look into it

scott


Reply
Mufassa
Posts: 168
(@mufassa)
Estimable Member
Joined: 19 years ago
51fordf2 wrote:

The transformer will have a power rating on it, i.e., how many amps it will put out...sample: primary 120 VAC, Secondary 60 VAC, 4 A (or amps). That means it will provide 4 amps. Each 100-light string is approximately .33 amps, so about 12 strings - Divide your amps by .33, should give you a close approximation of how many strings (at .33 amps) you can use. Now remember, each 100-light string is two 50-light strings in parallel, so a 50-light string, is 1/2 of .33 amps, or .165 amps, so you can run twice as many 50-light strings (if you separate them) as 100-light strings. You'll still have the same number of actual lights, just better control.
R

Correct me if I am wrong but the Amp's are dependent on the voltage, Watts/Voltage = Amps. So by reducing the voltage you are running the amps up. We assume .33 Amp per 100 mini lights at 120 Volts. Work the math backwards thats about 40 watts. So if we assumed 25 lights at 60 Volts that would be .166 Amps (10 watts/60 volts). Which is more than if you just assumed the .33 amps divided by 4 (going from 100 lights to 25)

--Greg


Reply
51fordf2
Posts: 1280
(@51fordf2)
Noble Member
Joined: 18 years ago

Greg - you are correct - I should have caught that. The resistance will remain constant, on the lights themselves. So using the formula for Power (watts), which is P = I X E, where I is current, and E is voltage, a 100 string is P = .33 X 120, or 40 watts, which is 20 watts per 50-light string at 120 volts. . 20 watts Cut the string in half, and divide voltage in half, gives us 10 watts per 25 light string at 60 volts. So it's 10 = I X 60, or .166 amps for 25 light string at 60 volts, exactly as you mentioned. I failed to divide the voltage, in my haste...

Thanks, Greg!

R


Reply
Page 2 / 2
Share: