Notifications
Clear all

Computer PSU

4 Posts
3 Users
0 Reactions
2,689 Views
Posts: 234
Topic starter
(@ikabod)
Reputable Member
Joined: 19 years ago
[#2377]

I have a handful of computer psu and all the "Red" wire only reads =3 Volt? Is that normal?
I understand that typical computer psu can draw out power as much as 5 volts for red and 12v for yellow.


3 Replies
blurp
Posts: 279
(@blurp)
Reputable Member
Joined: 19 years ago

This is not standard by today's standards, but there were some old proprietary AT-style PSUs that I have seen that did that. Haven't seen them in 10 years, though.


Reply
Posts: 234
Topic starter
(@ikabod)
Reputable Member
Joined: 19 years ago

I see. I thought I'm getting crazy, I would say those PSU's are 8-10 yrs old. I'll start scavenging for newer computer psu then.


Reply
Posts: 22
(@jetmech)
Eminent Member
Joined: 19 years ago

ATX power supplies are "switch-mode supplies"; they must always have some load to operate properly.
If you can find the datasheet it should list the minimum load, they vary from PSU to PSU

This is from the datasheet for the AOpen Model # ATX-300GU

HowTo mod a Computer PSU into a benchtop supply:
http://web2.murraystate.edu/andy.batts/ps/POWERSUPPLY.HTM

John


Reply
Share: