Another controller ...
 
Notifications
Clear all

Another controller question

11 Posts
5 Users
0 Reactions
4,111 Views
Goldie
Posts: 313
Topic starter
(@goldie)
Reputable Member
Joined: 19 years ago
[#8506]

l thought l knew how to do this but when l opened it up l have a question.
l have a bridge rectifier setup and will connect the string to this my question is do l need to put a resistor on the rectifier, pic shows resistor on the string already.

Pic attached

inside t controller
Led wresistor
other side t controller

10 Replies
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago

Hi

To me it look like ebay light.

If it is and if I have understood it right then I have understood it like you will have it to light constant not blink controlled by the controller there is with it.

I have them self and I do not change the resistors, I just solder over the PNP 😉

I will poste a picture later 😉

C - L


Reply
Goldie
Posts: 313
Topic starter
(@goldie)
Reputable Member
Joined: 19 years ago

Thanks for that Christmas Lights it will help a lot, figuring out what to do


Reply
kwajtony
Posts: 118
(@kwajtony)
Estimable Member
Joined: 17 years ago

Did taking the SCR out of the equation solve the problem?


Reply
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago

Hi

Sorry for a late reply 🙁 (I have been busy on my work)

But here are the pictures I was talking about 😉

C - L


Reply
kwajtony
Posts: 118
(@kwajtony)
Estimable Member
Joined: 17 years ago

Awesome.


Reply
Posts: 50
(@docjon)
Trusted Member
Joined: 19 years ago

Hey Goldie,

If you don't mind me asking, how much did you pay for each of those LED light strings? I am presuming that they are the 100 count ones?

Thanks


Reply
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago

I pay $7,5 with shipping 🙂


Reply
Goldie
Posts: 313
Topic starter
(@goldie)
Reputable Member
Joined: 19 years ago

Thanks Christmas Light looks the same as mine but mine has 4 lines not 5 l know what to do now.

as l do not want the controller, l'll join the first three from the left side to the SSR's (which is joined to the bridge rectifier) and the 4th one to the other connection on the bridge rectifier

These are icicles l bought during the year, they are 500 ct and cost around $120 from ebay, l'll be getting some more if l can get them at a lower price.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

I have seen these in hte shops lately but have always ignored them - until now.

How do you intend to control them? SSRoz or SSRdc? 240vac or low voltage?

They could be a quick answer to my Christmas tree.

Cheers
Matt


Reply
Page 1 / 2
Share: