adding electrical c...
 
Notifications
Clear all

adding electrical circuits / outlets - looking for pointers

85 Posts
21 Users
0 Reactions
30.9 K Views
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
beeiilll wrote:Another good reason why we "usually" don't recommend shared neutral setups in RESIDENTIAL wiring!

More likely a missed marked breaker. Can't happen in a properly installed shared neutral system.


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago
ErnieHorning wrote:Bill, also as you know, home owners sometimes do thing on there own. What happens if someone decides to use two non-tandom breakers. Not knowing that the neutral is shared, they put them both on the same phase? Under normal use, the endings not going to be a happy one.

Sent from my XT1650 using Tapatalk

Funny you should mention this one! We just had a house fire last week from someone doing just that! As you said, not a happy ending at all. Half the house is beyond repair and all belongings destroyed. Really sad too since the owners didn't want to pay someone to come in and do things for them. They were "saving some money"! Guess now the money wasn't so much of a saving.
Course the house was about 1/2 knob and tube wiring as well which didn't help with things. I cringe whenever I get asked to look at a job on a home which is knob and tube stuff still! But the "Historic Home" clause that gets used around here is not helping bring things up to date any faster either!


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago
mrGrumpy wrote:More likely a missed marked breaker. Can't happen in a properly installed shared neutral system.

Until "Joe Homeowner" decides to do his own upgrades or remodeling and doesn't understand shared neutral workings!


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
beeiilll wrote:Until "Joe Homeowner" decides to do his own upgrades or remodeling and doesn't understand shared neutral workings!

Or any other 2 pole circuit...like I said before, let's just take L2 away from Joe Homeowner. No more 2-pole circuits

Again, trying to discrediting a legal NEC circuit only shows your lack willingness to look outside of the box for better ways, weather you would use them or not.....Stay in the 60's that ok with me.


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago
mrGrumpy wrote:Again, trying to discrediting a legal NEC circuit only shows your lack willingness to look outside of the box for better ways, weather you would use them or not.....Stay in the 60's that ok with me.

Well, as I said before, shared neutrals are not allowed here but I have seen folks do it with good and bad results. Just because the NEC code may say it is okay does not preclude making sure it is allowed in the local that someone is trying to use it nor make it right.

If you want to get serious on code, then get a UL listing for a house wiring job and see how flimsy the NEC code can be.
I have not had a serious violation of any kind in over 20 years with the NEC code and my inspectors but yet I have never yet had a first pass inspection for a UL listing pass! Partly due to constantly changing requirements and codes updates but also to much more stringent and demanding inspections and inspectors.

I actually like to try and do at least one house a year to UL code to try and keep up with it. Much more work and time involved though to get it right.

Looking outside the box is one thing, suggesting things that can be seriously dangerous to the untrained in just plain stupid!


Reply
Page 15 / 17
Share: