beeiilll wrote:Well, as I said before, shared neutrals are not allowed here but I have seen folks do it with good and bad results. Just because the NEC code may say it is okay does not preclude making sure it is allowed in the local that someone is trying to use it nor make it right.If you want to get serious on code, then get a UL listing for a house wiring job and see how flimsy the NEC code can be.
I have not had a serious violation of any kind in over 20 years with the NEC code and my inspectors but yet I have never yet had a first pass inspection for a UL listing pass! Partly due to constantly changing requirements and codes updates but also to much more stringent and demanding inspections and inspectors.I actually like to try and do at least one house a year to UL code to try and keep up with it. Much more work and time involved though to get it right.
Looking outside the box is one thing, suggesting things that can be seriously dangerous to the untrained in just plain stupid!
Wow, it just keeps getting worse. UL is product safety, and applies to the manufactures procedures and final product. UL has no jurisdiction on wiring unless it changes the product that was shipped....barring designed changes, like knocking out a knockout.
Gee, I guess you don't know it all after all!
Just let people think you don't know, or speak and remove all doubt. 😕
Sent from my XT1650 using Tapatalk
OP was talking about both inside and outside nearby. It would add cost but you might think about getting gfci with led indicator light, then install them on the inside. Then feed off them to your outside outlets. Then a glance at a row of gfci's will tell you if you have a trip. You'll know where it is. And you can try a reset from inside.
beeiilll wrote:Gee, I guess you don't know it all after all!
beeiilll wrote:.......If you want to get serious on code, then get a UL listing for a house wiring job and see how flimsy the NEC code can be.I actually like to try and do at least one house a year to UL code to try and keep up with it. Much more work and time involved though to get it right.
ErnieHorning wrote:Just let people think you don't know, or speak and remove all doubt. ��
OK, I have given you the NEC code that allows shared neutral. Therefore no matter how you feel, NEC says it is safe, and any local jurisdiction can allow its use.
I feel you are just throwing out statements to discredit the NEC Code.....So, you tell me the U.L. Standard that applies to your statement: "UL listing for a house wiring job"
Here, I'll help with the standards web link: https://standardscatalog.ul.com/
Again, not the product, but the wiring job.
Example; UL 83 Thermoplastic-Insulated Wires and Cables. UL 83 covers the wire produce and it's application use. Not how it is circuited or installed.
.
Also, tell me where I can find "UL Code".....Is this new?
.
