adding electrical c...
 
Notifications
Clear all

adding electrical circuits / outlets - looking for pointers

85 Posts
21 Users
0 Reactions
30.9 K Views
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Bill, also as you know, home owners sometimes do thing on there own. What happens​if someone decides to use two non-tandom breakers. Not knowing that the neutral is shared, they put them both on the same phase? Under normal use, the endings​not going to be a happy one.

Sent from my XT1650 using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

My point exactly Ernie! Too easy to shut off one breaker and not the other on a shared neutral as well.
QUOTE]

How would you shut off "1" circuit of a 2 pole breaker. I guess lack of understanding requires you to discredit using false statements!

beeiilll, I guess you and ErnieHorning should try and update your training.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
ErnieHorning wrote:Bill, also as you know, home owners sometimes do thing on there own. What happens​if someone decides to use two non-tandom breakers. Not knowing that the neutral is shared, they put them both on the same phase? Under normal use, the endings​not going to be a happy one.

Sent from my XT1650 using Tapatalk

Those same homeowners have been known to pull 2 hot leads, thinking one was a neutral. Those type of homeowners need to rely on Current Day skilled electricians. They should never do their own work - even changing a receptacle.


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago
mrGrumpy wrote:My point exactly Ernie! Too easy to shut off one breaker and not the other on a shared neutral as well.
QUOTE]

How would you shut off "1" circuit of a 2 pole breaker. I guess lack of understanding requires you to discredit using false statements!

beeiilll, I guess you and ErnieHorning should try and update your training.

Gee, probably because I have seen people pry off the tie bar on two pole breakers all too many times and wonder why they had to pay me to explain that it was there for a reason! Or the homeowner who hooked up a 220 circuit using two non-adjacent breakers for a heater (wonder why he is still alive after that one actually).

Of course, my outdated training has caused me to not realize how many homeowners out there work on the incoming electrical service prior to the meter can! But I guess you think that is common eh?

I guess Ernie and I will just never be as wonderfully smart as you are but I will still work to keep people safe from bad advice that seems to come easily to others.


Reply
Posts: 155
(@rlemery)
Estimable Member
Joined: 13 years ago

I had a problem with a shared neutral set-up a while back. I was changing out a fluorescent light fixture in my garage. I turned off the breaker and started taking the fixture off the ceiling. The next thing you know I was knocked off the latter. Now when I do anything in the garage I turn off the main. I Talked to a friend of mine who is a local inspector and was told that the wiring met local code.

As for my Christmas power I have ran 2, 50 amp circuits to my pumphouse and installed 2, 50 amp camper outlets. I then have temporary subpanels that have outdoor rated breaker boxes that feed 4 circuits each with gfi.

Sent from my SM-G920V using Tapatalk


Reply
Page 13 / 17
Share: