Notifications
Clear all

Ws 2812b

17 Posts
7 Users
0 Reactions
4,591 Views
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

During th past several days of scanning Aliexpress , I noticed a few vendors claiming the ws2812b as cree leds .

as I do not have any of these and being less than informed , I posted this thread to see what those with experience may know .


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

This is from the web >

Why CREE vs. Epistars
CREE and Epistar are the type of Chip / Driver that is used inside the LED bulb. The difference is simple…quality! They are ALL manufactured overseas. CREE is based in the USA, designed in the USA and set the standards for the HIGHEST Quality LED! CREE is by far the leading innovator of lighting-class LED’s…period! This is why their prices are much higher then other brands, but they do last much longer.
CREE: 100,000 hour Life Expectancy
Epistar: 50,000 hour Life Expectancy
Epistar LEDs are made in Taiwan and will have a very good perfermance at the first stage being lighted on. Its brightness is roughly 30% less than an equivalent CREE chip. However, that is only a lie. After 1000hrs, you will find the truth. They will fade. The warmwhite color is changed to an ugly color, because the bad fluorescent powder being used when package.


Reply
komby
Posts: 871
(@komby)
Prominent Member
Joined: 14 years ago

After talking with one if my suppliers today he asserted that there were no Cree LEDs used in the making of led strip and that all of his ic+led for making strips of ws2812b come from the same manufacturer that everyone else buys from. His data sheets say epistar as the led. Not sure it's a concrete evidence exactly but it's something


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
angus40 wrote:because the bad fluorescent powder being used when package.

Where is the fluorescent powder used in the package? On an example WS2812 that I looked at, I can see a clear "window", the LED dies and WS2811 chip itself, but I don't see where the fluorescent layer would be. Is it part of the window?

don


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
komby wrote:After talking with one if my suppliers today he asserted that there were no Cree LEDs used in the making of led strip and that all of his ic+led for making strips of ws2812b come from the same manufacturer that everyone else buys from. His data sheets say epistar as the led. Not sure it's a concrete evidence exactly but it's something

Here is a list of cree led strip . I have no knowledge if these ali baba suppliers are all mis leading the consumer .

However I do not think this many suppliers would be mis leading or there would be no sales on these products .

Cree leds are usually tagged 100000 in their description

Here is a list of some led chips used to make strip that i am aware of .

Cree,Epistar, Nichia, Sharp

http://www.alibaba.com/showroom/smd-5050-cree-led-lighting-strip-lights.html


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

Just going through a few of those suppliers in your search and the one thing that jumps out is that the life expectancy is still 50,000 hours (as compared to 100,000 in previous post for CREE).
I don't put too much faith in product descriptions as far as the china resellers go, almost everything is copy and paste.
Best to pose the question up front and I always put such things in my descriptions when I make an order, that way I have a copy of the request to be used in case there is a dispute.
I have had 2 things disputed so far due to improper description and quantity. I won both by supplying a picture of the product showing the deficiency and pointing to what I was asking for in my description when placing order.


Reply
Posts: 1
(@raymond75)
New Member
Joined: 13 years ago

I have a Sandevices E6804 but for 2 ws2812B strips, it would be overkill. I'll just order a couple more of the single universe controllers and go that way.


Reply
Page 2 / 2
Share: