Are there any of you using these Pixels with the SanDevices controllers ?
Could you verify that these are indeed cree leds ?
Thanks
Whats a cree led???
gdyrdave wrote:Whats a cree led???
Cree leds are premium quality brand of led compared to the common used Epistar
I have some 2812B's but did not know there is a difference. I did try some of them on a E6804 and works fine if that helps you.
Thank you that help alot .
angus40 wrote:Could you verify that these are indeed cree leds ?
How can you tell them apart?
don
They work fine on the e682 and the 6804
Cree are distinctly brighter when compared to equal pixel count and voltage .
I have some cree 3528 60/meter and some 60/m 50/50 sharp and epistar > the cree are considerably brighter < a much sharper brightness .
Though the 3528 are sized differently ( smaller than the 50/50) their brightness is quite noticable .
you should be able to compare the 2811 to the 2812 and see .
If these prove to be cree or becomes the standard for the 2812b strip , ,I would say that this is the best deal for pixel strip yet and would be considering using them in place of my tls 3001 strip.
I didn't think you had a choice with the ws2812b because the led and IC are all in one I just assumed that they all come directly from world semi. ?
