Wired vs Wireless
 
Notifications
Clear all

Wired vs Wireless

38 Posts
13 Users
0 Reactions
8,981 Views
Posts: 172
Topic starter
(@rooster519)
Reputable Member
Joined: 11 years ago

I understand that difference. My thoughts are to employ Pixelsticks as opposed to multiple Pi's. I know this will be more traffic being sent, but should work just as well.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

famous last words

Rooster519 wrote: I know this will be more traffic being sent, but should work just as well.

Yes it will work, with the right tweaks, in the right environment, and with an appropriate volume of traffic.


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

If you have an Android phone, just look up WiFi Analyzer in the store.

You will also want to purchase a dedicated wire Access Point for the show as well as a separate router. You will need to keep it on it's own Network Again in testing you may get away w/ using a wireless router but I would not want to run my show on oine. A number of those running WiFi have used the Ubiquity AirMax NanoStation Loco M2 running it in AP mode. You are going to need to have your AP up and running when you do your site analysis of WiFi strength.


Reply
Posts: 172
Topic starter
(@rooster519)
Reputable Member
Joined: 11 years ago

I have already keep my wired show separate and looking at the NanoStation, it should just plug into my switch which I already have, unless I'm missing something. What about packet loss using this? Is this a major problem running wireless?


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Yes, you're going to get a good deal of packet loss while using wireless. But in general, i wouldn't consider it a major problem. Because of the high loss potential, it's important to make sure you're using multicast for sACN and keep all the unicast traffic off the show WiFi network. This will make sure that when a packet is lost, it will just be lost and won't try to retransmit. And even more importantly, those retries won't hold up the rest of the data in queue. You'd be surprised how many packets you can afford to lose before you start to notice it. (and that's coming from a really picky guy)


Reply
Page 2 / 8
Share: