Wire type suggestio...
 
Notifications
Clear all

Wire type suggestion

6 Posts
4 Users
0 Reactions
5,512 Views
Posts: 133
Topic starter
(@byhova)
Estimable Member
Joined: 9 years ago
[#50785]

I had a quick question for you guys. I am starting to slowly put things together waiting for my lights pre sale to show up. I am using ESPixelSticks and going to try the PVC because I found some thinner walled PVC pipe.

However my question is do you guys recommend stranded wire or solid wire? Menard’s had a couple 100’ spoils of 16 gauge wire solid on clearance, but I thought I should probably use stranded. What do you guys recommend for power supply to ESPixelStick or any other application for the lights I will need.

Thanks in advance


5 Replies
Posts: 144
(@drewdennis)
Estimable Member
Joined: 9 years ago

Stranded is preferred. Try to avoid CCA (copper clad aluminum). 18ga should be the minimum you use. I've been using 18/4 security wire, and using 2 wires for the ground. I am also using sprinkler cable for my pixel based landscape lights (18/5) since it's rated for direct burial.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I use 16 AWG stranded and 14 AWG stranded. NO CCA.


Reply
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago

I use Monoprice Stranded Pure Copper speaker wire. It comes in both 2 & 4 conductor rolls in a variety of guages to meet your needs.


Reply
Posts: 133
Topic starter
(@byhova)
Estimable Member
Joined: 9 years ago

So do you use the 4 conductor so you can run power, ground, and date all in the same run? What do you do with the 4th wire, just leave it unused?


Reply
Page 1 / 2
Share: