Which Pixel Control...
 
Notifications
Clear all

Which Pixel Controller is Best?

41 Posts
25 Users
0 Reactions
21.4 K Views
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago
jem5136 wrote:If all it was is a bad card, then I've had about 10 of them! I have had nothing but issues from day 1. Everything from setting the controller up (the software not seeing the controller, but the controller saying it is connected correctly), to ports simply not working (some because of blown fuses, others for reasons I'm still not sure of), to the boards just not turning on every time (like a bad logic fuse, but that not being the issue because the board does turn on sometimes), and most recently I have two board that are running my mega tree that both stopped working the same night with the same issue. LOR usually doesn't give me much help, they try to say something like "well if you would have bought more of our products..." or "I wrote the software, so I know what is happening to the board and you don't"

When I said "I wouldn't say what you had was a bad card" I meant the card design. I have a Pixlite16 and if it is the same design there is nothing wrong with the design of that card and I was able to make it work just fine. The only complaints I've heard is it had no embedded web page and needed an external assistant program to configure. I have to say from your description of bad ports and blown fuses that you might be self inflicting some of these problems. Just buy another controller and see if everything is great.


Reply
Posts: 297
(@1983ss454)
Reputable Member
Joined: 16 years ago
Gilrock wrote:When I said "I wouldn't say what you had was a bad card" I meant the card design. I have a Pixlite16 and if it is the same design there is nothing wrong with the design of that card and I was able to make it work just fine. The only complaints I've heard is it had no embedded web page and needed an external assistant program to configure. I have to say from your description of bad ports and blown fuses that you might be self inflicting some of these problems. Just buy another controller and see if everything is great.

I have to agree with this. I'd have to say 95% of the time when I blow a fuse it's usually something stupid I did and then I look say a few choice words and fix it lol

Sent from my iPhone using Tapatalk


Reply
jem5136
Posts: 306
Topic starter
(@jem5136)
Reputable Member
Joined: 17 years ago

The fuses are my fault, I will admit that but it was a learning curve. However that is not the main reason why I want to use a different controller.


Reply
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago
deonb wrote:I think you mean Class 2 (UL1310 - the 100W limited thing). A Class II supply is a double-insulated supply. Technically a standard 5V 60A power supply inside a CG1500 would be Class II - albeit not a UL Listed setup.

But yes, using Class 2 power supplies seems like it would be a much more sane requirement than would be one particular brand or assembly style of pixel controller over another.

Obviously we don't generally use Class 2's, but it would make sense to do so in a commercial install. Painful... but sensible.

Nope, 5v at 60amps is not class II. Class II is max 100 watts or 5amps within the allowable voltage. This is set my the NEC.


Reply
Posts: 5
(@marmalade)
Active Member
Joined: 11 years ago

Surprised Shelbys ESPixelstick doesn't even get an honourable mention here!

Pumping out up to 6 universes of wifi pixel data for under $25! My entire display (pixels & statics) is driven with them, not a comms cable in sight 🙂


Reply
Page 7 / 9
Share: