I decided to build a BBB16 (Scott Hanson DIY, through hole version).
If I go into Channel Outputs and setup 50 pixels on port 1 and try any test pattern, Nothing.
If I add a 2nd 50 to output 2 and try test pattern, Nothing.
If I add a 3rd 50 to output 3 and try test pattern, it works.
If I set output 3 to 0 and then output 4 to 50, test patterns work.
Now that is weird enough, but it gets even weirder....LOL
If I remove the 50 from output 4 and set output 3 to 10 pixels (still have 50 connected). 10 pixels from outputs 1,2 and 3 light up.
Doing tests from status/Control using Display testing will only work when I select all local channels or all local channels.
Using Models does not work.
I have loaded FPP several times, version 8, version 7.4 and 7.5 and even back to 6.3
I also have loaded the firmware both from site within FPP and downloaded from github and loaded.
Anyone have a BBB16 and see this behavior?
Don't have one but it sounds like it could be related to a bad eeprom. Are you using the "fixed" eeprom?
The "fixed eeprom"? Do you mean the one on github?
BBB16v2-221118135219-eeprom.bin
I tried loading that one manually as well as downloading direct from scottnation within FPP. Both doing same thing.
Tried upgrading to v8 FPP and I lose output screen entirely (not showing any outputs), but will accept updates from xlights. Same issue with testing though, only works when I select all channels.
I have not tested anything yet, I'm still a few weeks away from being ready for that.
I think what Mike means by fixed is, actual physical eeprom on board. There is a option for virtual eeprom for boards without a physical one.
I turned in a ticket on no channels on channele output page a few weeks ago, but I'm sure it's not a high priority right now. I think it has something to do with the eeprom but not sure.
I have a player that doesn't have anything on output page but I have a remote that is working fine. I do have FPP license for both so I can go over the 50 pixels per output.
Everything works fine on FPP 7.5 it's just on V8 that I loose my outputs.
Scott has two eeprom images on the github for the bbb 16. The lastest one says "fixed". Looks like it is probably for later versions of FPP. Maybe V8 needs yet another eeprom?
