OK. it appears my English is not the same as everyone's on here. :happycrying:
I'm talking bullet pixels. not strips. In fact ALL my strips have never given me issues in the three years since I put them up. But that's another discussion. :biggrin:
And yes they are supposed to be waterproof but I suspect the quality out of many of the suppliers is lacking.
I'm having the same issue with "waterproof" bullet pixels purchased in the last couple of years. Every time it rains I lose a couple. Don't ask me how they are usually the ones the most difficult to get to....Grrrrrrr. And it wouldn't be so bad if only 1 pixel went bad but this reminds me of the old series incandescent light strings....one bulb burns out the whole string of 50 or 100 go out.....
I don't mind spending 3 weeks setting up the display but the maintenance to keep things running, considering how much rain we get in this area, is beginning to turn a fun hobby into a not fun job....I even shut down the display when it rains hoping that will help but I'm not sure it helps at all as I can have pixels that worked in the rain not work the next day.
Also, you'd think that the pixels that are not sealed properly would all go out after the first rain....but every time it rains more go out that didn't go out the last rain.....
I didn't have this much of an issue before the past couple of years so I strongly suspect the factories found a 'cheaper' way to waterproof....so to save .03 cents on a string we get the nightmare of waterlogged pixels.
It could be a make-you-buy-more strategy. My meteor showers all have crappy PSU's on them--as in 7.5's all putting out 6.7v. They all started going out the minute it got cold. Fortunately for me, it immediately looked like a power injection problem. Instead of buying more, I simply used a couple adjustible-voltage wall warts and set them to 7.5v. Now instead of being in the trash, those meteor showers look even better than when I bought them
Santacarl wrote:I'm having the same issue with "waterproof" bullet pixels purchased in the last couple of years. Every time it rains I lose a couple. Don't ask me how they are usually the ones the most difficult to get to....Grrrrrrr. And it wouldn't be so bad if only 1 pixel went bad but this reminds me of the old series incandescent light strings....one bulb burns out the whole string of 50 or 100 go out.....I don't mind spending 3 weeks setting up the display but the maintenance to keep things running, considering how much rain we get in this area, is beginning to turn a fun hobby into a not fun job....I even shut down the display when it rains hoping that will help but I'm not sure it helps at all as I can have pixels that worked in the rain not work the next day.
Also, you'd think that the pixels that are not sealed properly would all go out after the first rain....but every time it rains more go out that didn't go out the last rain.....
I didn't have this much of an issue before the past couple of years so I strongly suspect the factories found a 'cheaper' way to waterproof....so to save .03 cents on a string we get the nightmare of waterlogged pixels.
Yes, this is exactly what is happening. UPDATE I bought some Conformal coat spray https://www.chemz.co.nz/products/electrical/24-7-electrical-formula I sprayed the ones that were giving me issues and after having rain today it seamed to have worked. (hopefully I didn't jinx it)
townshend lights wrote:Yes, this is exactly what is happening. UPDATE I bought some Conformal coat spray https://www.chemz.co.nz/products/electrical/24-7-electrical-formula I sprayed the ones that were giving me issues and after having rain today it seamed to have worked. (hopefully I didn't jinx it)
Oh man - you're in for a hard time. I remember running through my pixels every night and spraying them - and that's after I plasti-dipped the whole bunch.
Next time you buy bullets from an unknown supplier, don't just ask for waterproof, or "IP68" or whatever. Ask specifically if they're Epoxy-resin injected. That's really the only thing that works.
