On your .110 controller you have your universe configured from 1-12 for the sockets yet your lights are configured starting at universe 13 just as your .111 controller does. Seems that your .110 controller needs to be configured so the ports start at universe 1, not 13...
Thanks deonb
Budude, I noticed that after I posted and corrected (was making changes and took the screen shot before I hit save so it was reflecting the old universes) Still did the same thing.
I was thinking it was something along the lines as what deonb is describing but was unsure.
Thanks fellas!
OK - I would suggest a reboot of the controller after making unicast/multicast or universe changes - maybe not necessary - but can't hurt and rules it out in either case. One thing I noticed is that the L2 MAC address of both controllers is identical - this may be causing some issues as well especially when using Unicast. I don't recall if there is a way to force the MAC to be different. Not sure if you mentioned it but do both controllers work when only the one is plugged in and the other not? If so, then I would investigate the identical MAC issue...
budude wrote:One thing I noticed is that the L2 MAC address of both controllers is identical - this may be causing some issues as well especially when using Unicast. I don't recall if there is a way to force the MAC to be different. Not sure if you mentioned it but do both controllers work when only the one is plugged in and the other not? If so, then I would investigate the identical MAC issue...
Oh wow. Good catch. You can't communicate to two machines on the network with the same MAC address - they'll NACK each other's packets and keep dropping the connection - at least the web site admin would do that if the IP is at all implemented according to RFC on the WizNet. Well that, and if you're calling it from 1 client it will ARP just one of the two MACs.
Perhaps this was just accidental wrong screen shots?
That's exactly what it was deonb, I was playing around with settings on both units a ton yesterday and took the screen shits while setting them back up to the way I had them. Just I can assure you they are different MAC addresses.
Thanks for the help!
