Technicolor quality...
 
Notifications
Clear all

Technicolor quality?

256 Posts
45 Users
0 Reactions
83.3 K Views
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

Chicken,

Ray definitely shipped me pigtails showing data as the center pin but the ground is on center for sure. The ws2811 label on the base doesn't really seem to imply anything since we all had v2's and only some had the ws2811 label. Mine all had the arrow. That sealant you're seeing is Ray trying to make these work. He was told by us that the two most likely failures are moisture getting in from the wire to base junction or the LED to base junction (my failure mechanism). I plan on testing some of these new sealed versions after the new year as well. As we have been discussing here and elsewhere, the bulb orientation in the display seems to matter... My theory is that vertical is bad, horizontal and upside down are good... I plan on testing that as well (gonna leave some going in my back pool deck this year). All of mine were placed vertically and failed horribly. A guy down the street from me (I.e. similar weather) placed some of his vertical and some horizontal pointing out at the viewer... and only his vertical bulbs failed...

Louie


Reply
MindTrik
Posts: 1542
Topic starter
(@mindtrik)
Noble Member
Joined: 16 years ago

Wiring is side with arrow ground, center is data and the side with 2811 or bare is V+. THAT changes after the first pixel. From the out of the first pixel to the in of the Last pixel data is on the side with the arrow, ground center and V+ is on the side with 2811. From the FACTORY installed pigtails as they go to the first and last pixels...wiring is like the V1s


Reply
Posts: 226
(@chicken)
Reputable Member
Joined: 17 years ago
chicken wrote:As nutz4lights did if anyone wants some v1 technicolors to play around will ill given them to you for free all you have to do is pay shipping. I am super busy with work until March so send me a PM late February if you want some and ill box them up and let you know what the cost would be to ship them.

Actually I want to get rid of these sooner. I just started a new thread. If you are interested PM me. Thanks!!
http://doityourselfchristmas.com/forums/showthread.php?36914-Free-V1-Technicolor-Pixels&p=361583#post361583


Reply
Posts: 1
(@dglandorf)
New Member
Joined: 12 years ago

So, After looking at this threadnought that spans two years whats the verdict? I would love to have an RGB C9 but I lack an electrical engineering degree and I want something reliable.


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Skip the technicolor. Some do OK some do not. A lot of people are happy with the pixabulbs, I stepped up to commercial quality and will not have any issues except for trucks driving under my "mega tree". As they say, ouch once and be happy for the long term.

Sent from my Sony Tablet S using Tapatalk


Reply
Page 51 / 52
Share: