so timons rework of how the wire is run would fix the V leak
That would fix that problem. I have some of the v leak on my 12v square resin filled pixels. I still think if moisture still is present, the problems are not going away. It will take longer to fail. I would like to know the type of conformal coating used, the temperature of the injected material. I would like to see if some of the new test pixels taken apart to see if the coating is applied. I would like to see some outdoor tests on the strings in various environments for an extended duration.
Question: Assuming the material used on the wire insulator is different from the injection molded plastic of the outer case, has anyone check to see if the wire and case have different contraction rates when they get frigid cold?
I'm wondering if the wire insulator contracts faster than the case, leaving an opening for water intrusion?
Guys, this thread has been very informative.
Thanks for the diligence of info. What I was not able to get out of Ray in my communication with him, is what type of testing and QA went into these pixels. He told me he personally tested the batch I got, which was 60 strings worth (2520 pixels). I argued that he if he had tested them as he said he did, he could not have not seen issues. My strings were in the elements since late October, and even my first few test runs, I saw failures.
What if any is known about how the extreme temps affect these overall. Hopefully the kinks can be worked out, as I really like this form factor. Those that I know who got the 5V version, have seen very few failures.
The new PCB is a little larger and it's thicker now that is uses a 0.031 board instead of a 0.015 so that will help. The pads are now much larger so the wires should not pull away. I'll talk to Ray about the speed of injection. It's AC careful balance of temperature and pressure/injection pressure. If you run hotter it takes less pressure but you risk parts and wire with the hotter temperature.
The one with water damage, we're the wires spliced? We've seen water get into the pixels through the wires.
