Technicolor Pixels
 
Notifications
Clear all

Technicolor Pixels

140 Posts
31 Users
0 Reactions
43.4 K Views
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

Well that is why I posted here, although I don't have Technicolor pixels I am seeing the exact same problems. My pixels were outside one week and failed miserably. I find it hard to believe its all moisture related. I could be wrong though.


Reply
Posts: 14
(@nerdcage)
Active Member
Joined: 19 years ago
magii wrote:I did the 3D model for the molds to be made, nothing more. The circuit boards weren't "designed" at all, internally the technicolor pixels are identical to all of the other 12V 2811 pixels Ray sells. That has been well documented on multiple forums and anyone who has e-mailed Ray knows that too.

So did you design the PCB or not? Because back in October you were signing a different song:

Untitled

Reply
Posts: 9
(@magii)
Active Member
Joined: 18 years ago
NerdCage wrote:If that's the problem it's a shame you waited this long to pop out and speak. Pretty long winded post defending your design, distancing yourself from failures, and washing your hands of any responsibility. Shame not a word was used to try and help the people having problems with your product.

Nerd, I haven't been active on many of the forums for a very long time, mainly due to the egos and idiots that seem to abound with fervor. I have, however, been in constant communication with people who actually have these and other 12V 2811 pixels that seem to have the exact same issues to try to nail down what exactly the problems are and to see if there is a solution. Some users have been finding that certain settings and configurations are working better than others and all of that information has been passed along to the people who have been affected. So the assertion that I "waited to pop out" is a false one. I was notified by more than one of those people that a whole lot of false claims were being made here so I am attempting to set the record straight as far as what my involvement was. Lots of folks are having issues with many of RAYS products, again, I'm not a vendor and I don't sell any products nor have merchandise. I don't think it's unreasonable to ask people who are having issues with a product they purchased from a vendor to hold that vendor responsible and ask them to stand behind what they sold. Since, at least in the case of the technicolor, Ray is the vendor I am suggesting that people address their problems with him. Again, lets try to stick to facts and contribute helpful information instead of making false claims and flinging accusations.


Reply
Posts: 9
(@magii)
Active Member
Joined: 18 years ago
NerdCage wrote:So did you design the PCB or not? Because back in October you were signing a different song:

When I did the design for the mold, Ray sent me a sample of the pixels in bare PCB form so that I could take measurements from them to make sure they fit inside the mold. Those samples had a through hole connection for the wires. So yes, when I did the design, the bare PCB pixels I was supplied with had holes and it was my impression that all the strings that were being made were done that way. I don't know who Ray works with to design the PCB or why the later batches that were made were done with pads instead of holes. When I have questioned him on it, and why the changes were made, he only says that it was done by "his engineer". The explanation I was given about the regulators being added after the first batch was that the engineer thought it was a better more stable design than what Ray had been using previously. Again, since I haven't been involved in that part of the process, I really don't have much information on why those decisions were made. My song has never changed and I have always been completely open and honest about what is going on, hell for anyone in the development group they saw everything from the initial drawings and models all the way through the first prototypes because I shared everything. From the beginning it was never about me, it was just about getting a more water proof pixel that was molded in a way to make them easy to use for the things specific to our hobby.


Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago
dougd wrote: My pixels were outside one week and failed miserably. I find it hard to believe its all moisture related. I could be wrong though.

If you go back and look at the threads from 2011-early 2013 a lot of people lost their entire strings due to water damage in the earlier silicone molded pixels. Back then most of the 2801,1804 and 6803 were only available in silicone and people went to all sorts of lengths to solve the water ingress issues. In some of them you could even see the unprotected pcb in the back of the node.

The Technicolor and epoxy encapsulated pixels are more recent attempts to solve the water issue.


Reply
Page 14 / 28
Share: