Store Front Pixel I...
 
Notifications
Clear all

Store Front Pixel Installation

30 Posts
8 Users
0 Reactions
9,436 Views
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago
[#52656]

I have a business owner that has contacted me about putting lights in his business window. I think I want to use PixaBulbs. I would like to do this as inexpensive as possible. I have a $500 budget but it needs to be stand alone. I was thinking of using a Raspberry Pi to run FPP with a wired connection to the pixel controller. I would program in Vixen 3. Could I do this with a Renard PX1 pixel controller? He wants sound from speakers on the sidewalk as well. Does this sound doable? If not what would you suggest?

Thanks

Sent from my iPhone using Tapatalk


29 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yes, but why would you use a seperate controller? The PI with a pixelHat would be much simpler to install and maintain. Add an Audio dongle on the PI to drive your speaker and you are all set. If you can have the PI close to the display then you can go up to 5m between PI and first pixel without a pixel buffer. Add a pixel buffer and you can go another 5m. Keep adding and keep going.


Reply
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago
MartinMueller2003 wrote:Yes, but why would you use a seperate controller? The PI with a pixelHat would be much simpler to install and maintain. Add an Audio dongle on the PI to drive your speaker and you are all set. If you can have the PI close to the display then you can go up to 5m between PI and first pixel without a pixel buffer. Add a pixel buffer and you can go another 5m. Keep adding and keep going.

What pixelHat would you suggest? I don’t know why I didn’t think of that. I used a matrix PiHat from Crockett for my tune to sign last year. I guess I didn’t realize there was such a thing for pixel strings.

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago

Falcon pi cap ? Also Bwinter was working on some aswell .

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago

https://jboards.ecwid.com
These show out of stock

Sent from my iPhone using Tapatalk


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
davdue wrote:What pixelHat would you suggest? I don�t know why I didn�t think of that. I used a matrix PiHat from Crockett for my tune to sign last year. I guess I didn�t realize there was such a thing for pixel strings.

Sent from my iPhone using Tapatalk

I use the RonP Pixel PiHat. However, a quick search does not show a source for it anymore. If I were to buy another one today it would be the Falcon-PI-Cap.


Reply
Posts: 116
(@jcasterline)
Estimable Member
Joined: 15 years ago

I used a 3v-5v level shifter, inside heat-shrink tubing.

Sent from my XT1254 using Tapatalk


Reply
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago
wilmar wrote: https://jboards.ecwid.com
These show out of stock

Sent from my iPhone using Tapatalk

Who is this on here? I wonder if he will get more in stock?

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago
davdue wrote:Who is this on here? I wonder if he will get more in stock?

Sent from my iPhone using Tapatalk

jeremy0203 there is a thread on it here

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
(@wilmar)
Noble Member
Joined: 8 years ago
davdue wrote:Who is this on here? I wonder if he will get more in stock?

Sent from my iPhone using Tapatalk

http://doityourselfchristmas.com/forums/showthread.php?52833-Pixel-String-Pihat-Basic-for-Raspberry-Pi-pixel-control

Sent from my iPhone using Tapatalk


Reply
Page 1 / 3
Share: