What about fm transmitter inside with a battery operated radio mounted outside?
Sent from my iPhone using Tapatalk
That works fine for us home users. Unless we do something stupid, the FCC tends to ignore us. In a commercial application you have to be VERY careful about "transmitting" a radio signal and even more careful about transmitting copyrighted material. IMO it is best to use wires for the audio.
MartinMueller2003 wrote:That works fine for us home users. Unless we do something stupid, the FCC tends to ignore us. In a commercial application you have to be VERY careful about "transmitting" a radio signal and even more careful about transmitting copyrighted material. IMO it is best to use wires for the audio.
Ok makes sense , how about a set of walkie talkies one inside one outside
There are some cheap external speakers to connect to the one outside and other one inside has a mic connection just spit balling here lol
Sent from my iPhone using Tapatalk
I’ll see what I can do with a wired set of speakers. I haven’t been to the business yet.
Sent from my iPhone using Tapatalk
I’m sure it’s been tried but also found this

Sent from my iPhone using Tapatalk
Here is a picture of the front of the business. I am thinking of outlining the 3 windows with PixaBulbs and then 3 snow flakes in the windows above them. Probably 24” ones.

Sent from my iPhone using Tapatalk
RGB Wall Washers pointing up over the sign and down inside the canopy. Is it cloth? Then Up in the canopy as well.
So I ended up purchasing another Performance Teknique ICBM-134 FM transmitter like I use for my home show. I have used it for years with great success. It is just low enough wattage that it only transmits a couple houses away. My problem is now I don't have a way to connect it to the Pi Zero with the Jboards Pixel String PiHat on the Pi I really don't have a good way to had an audio PiHat. Should I just swap out the Pi Zero for a Pi 3B or does someone have any suggestions for adding audio out with FPP on the Zero?
davdue wrote:So I ended up purchasing another Performance Teknique ICBM-134 FM transmitter like I use for my home show. I have used it for years with great success. It is just low enough wattage that it only transmits a couple houses away. My problem is now I don't have a way to connect it to the Pi Zero with the Jboards Pixel String PiHat on the Pi I really don't have a good way to had an audio PiHat. Should I just swap out the Pi Zero for a Pi 3B or does someone have any suggestions for adding audio out with FPP on the Zero?
simple anwer is. get a pi3b and put it inside the store. make the pi3b the fpp master and connect the audio to it. do not configure any outputs on the master (well you could if you wanted to) and make the zero a slave and let the zero drive the lights.
MartinMueller2003 wrote:simple anwer is. get a pi3b and put it inside the store. make the pi3b the fpp master and connect the audio to it. do not configure any outputs on the master (well you could if you wanted to) and make the zero a slave and let the zero drive the lights.
I could also just repurpose the zero and just use the pi3b and the PiHat and have it as a stand-alone. Hmm maybe put some extra leftover pixels around my cube at work. [emoji3][emoji848]
Sent from my iPhone using Tapatalk
