Notifications
Clear all

Star pixel help

4 Posts
2 Users
0 Reactions
1,871 Views
Posts: 181
Topic starter
(@mangrove)
Estimable Member
Joined: 16 years ago
[#35701]

I’m new to pixels, I had zero pixels in my 2014 display. That will change for 2015. I have stars on my roof which I made from round stock which I zip tied rope light to the stars. I plan to rebuild these stars using pixels.

Should I use round or flat stock to build these stars? If I use round, then I’ll have round stock to attach the pixels to. I assume if round stock I’d use some sort of bullet type pixel. Or should I use flat stock to build the stars? I assume if I use flat stock for the star construction I can use pixel strips to maximize the pixel in the direction I want it to face (the stars are on the roof so they don’t need to be seen from behind).

Not having any experience with pixel strips I don’t know if I can bend them around the points of a typical 5 point star. Can waterproof pixel strips be bent around the point of a typical 5 point star? I guess I can use strips on round stock but unless the pixel has 180 degree view, it may not be that visible.

I appreciate any thoughts and feedback from others that have encountered a similar situation. I need to order pixels soon and I want to make certain I get the right stuff.


3 Replies
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

You cannot bend the strips from side to side really at all. For my star, I cut them into strips and sealed the ends but you may find it easier to use bullet style and keep a more traditional look. There are a few posts on the FB light forums about clips for pixels to round-stock style props.

Here is one strip-let - the individual strips got tie-wrapped down to flat-stock aluminum that I bolted together:

Here is my initial layout - - I backed off on some of these and ended up with only 3 concentric stars...

Final outcome - it's about 4-1/2 foot across:

1397729 663442313678252 1149436827 o
1475833 676161679072982 855379395 n
920458 662255000463650 1356511567 o

Reply
Posts: 181
Topic starter
(@mangrove)
Estimable Member
Joined: 16 years ago

Looks great Brian. Pardon my ignorance but what are "FB Forums?"

Again, love your star, mine won't be nearly as complicated; at least year one with pixels....


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Facebook - there are several now (too many to be honest...).

I used 60LED/m strips (5v) - in the end it wasn't really that hard to build - I got the aluminum for a decent price delivered (cheaper than HD or Lowes) and cut the aluminum strips with a cheapo cutter from Harbor Freight. It is bolted together with #8 or #10 bolts. It mounted easily with a couple hooks on my garage ridge.

But yeah - there have been a couple designs posted on the FB pages for pixel clips. I sure wish there was a mini size pixel though - I have a few things I'd like to convert over and could use the existing wire clips for minis.

10178020 872056912816790 4184681995019097060 n

Reply
Share: