I've decided to consolidate controllers and something just isn't coming out right.
As you can see from the pic I have 958 pixels for 2,874 channels. When setting up the controller on the web page it automatically adds the start universe and channel. For 2,874 channels I should have 5.63 universes but the web setup is only giving me 5 universes. To me it seems output 2-3 should start on different universes only because output 1 started on 5 and ended on 6, then output 3 should start on 6 and end on 7. Am I missing something? I've gotten pretty good and setting up controllers but now I'm not so sure.
The use of "Group Size" has an effect on the channel counts. The controller sees 6 pixels as 1 in output 2. (Or as "3" in output 3.)
algerdes wrote:The use of "Group Size" has an effect on the channel counts. The controller sees 6 pixels as 1 in output 2. (Or as "3" in output 3.)
After reviewing the manual you are correct. That now presents a problem. 115 pixels in groups of 6 means 19.1 pixels for 57.4999 pixels. Now what? do I round up to a number that's divided by 6? The 63 pixels in groups of 3 work out correctly to 21 pixels, 63 channels. It's that 115 pixels that has a odd channel count with 57.499 channels. Figuring it this way:
300 pixels - group size 1 = 900 channels
115 pixels - groups size 6 = 57.4999 channels
63 pixels - group size 3 = 63 channels
480 pixels - group size 1 = 1,440 channels
Total channels = 2,460.499 channels
I'm confused about a decimal channel.
Okay. Got it figured out. I needed to round off because pixels use 3 channels. Therefore, instead of 2,460.499 channels, I will have 2,463. A number that can be divided by 3. Takes me awhile but your point about the grouping helped me understand what was what. Thank you.
You are welcome.
