Santa/witch hat pix...
 
Notifications
Clear all

Santa/witch hat pixel spacing

4 Posts
2 Users
0 Reactions
1,658 Views
Posts: 90
Topic starter
(@katiekwilts)
Estimable Member
Joined: 12 years ago
[#35850]

So, I have an idea, and Mr Katie thinks it's crzy. But, I want a talking face, with a hat, that can double as a witch and a santa so he doesn't have to go up on the roof twice, and I get two spholidays for my money. I plan to do it out of coro and have the face portion with just strands of lights, but the hat needs to be pixel RGBs so it can change colors depending on the season and what not...anyway, the only thing that has me stumped is the spacing for the pixels, and I need to make a decision for the preorder. The plan is for it to go up on the second story, and the house is set fairly close to the street, on a little bit of a slope. Thoughts? I've attached a quick sketch of the hat portion of my idea.

Thanks!

image

3 Replies
bcstuff
Posts: 449
(@bcstuff)
Reputable Member
Joined: 16 years ago

Did you mean Pixel (individually controllable lights) or just Dumb RGB (whole string changes at same time?

Either way the pixel or Dumb RGB lights may look a little different compared to your LED lights for the rest of the face and hat. The easiest thing would be just to add a second or third color of LED lights to your hat. Light Red for Christmas, Green or Purple for Halloween. If you don't like that idea, I would just approximately match the spacing to the distance between each regular LED light on the strings.


Reply
Posts: 90
Topic starter
(@katiekwilts)
Estimable Member
Joined: 12 years ago

Hmm...you make a really good point about the face lights looking different than the hat lights. I had never thought of that. This past year was our first year and everything we did were GECE, so I've only worked with one type of bulb/pixel. I do want to stick with smart pixels, so that I can do some fun effects with the hat, like chase color through, or alternate colors. Really, I have a lot of fun with my pixels 🙂 My original plan was to have the whole hat/brim/tassel as pixels and do the face shape as LEDs just because I have a bunch of LEDs NIB laying around not doing anything (I'm talking probably 20 boxes) and I thought I could make the project a little cheaper that way, but maybe I need to think about doing the lips and eyes in pixels as well, just so it looks good. So, the question remains, what kind of spacing should I be thinking about? Do you think 3" is right, or can I get away with 4"? I really want the face as I think it would be a nice addition to my display, but I also want to frame all my windows/door and do the columns this year so if it starts getting too pricey I might have to keep this project in the development phase for another year!

Thanks!


Reply
bcstuff
Posts: 449
(@bcstuff)
Reputable Member
Joined: 16 years ago

Spacing has more to do with what you plan to do with the pixels and the distance from you audience. You can see videos of my 2014 display in my signature below.

I had my big pixel megatree with 3" spacing vertically, horizontal spacing was 8" at the bottom and horizontal spacing was 1/2" at the top.
The 3 Midi megatrees are 3" spacing vertically, 12" at the bottom and 2" at the top.
These megatrees were all about 50' away from the filming location (the edge of my neighbors yard).

The Mega Wreath around front door had 4" vertical spacing and 4" horizontal spacing and was about 65' away from the filming location.

I wasn't happy with my horizontal spacing because I was trying to do pictures with pixels, although the text came out OK.

I think 4" spacing would be OK for lines and shapes but if you did decide to go to 3" spacing, it would only add minimal cost because it is only 14 extra pixels (if you did the entire hat in pixels).

14' lighted area on hat - 4" spacing = 42 pixels -and- 3" spacing = 56 pixels


Reply
Share: