Pixels act crazy wh...
 
Notifications
Clear all

Pixels act crazy when LOR is running, while testing in Nutcracker

9 Posts
6 Users
0 Reactions
2,089 Views
Posts: 374
Topic starter
(@mberta2)
Honorable Member
Joined: 13 years ago
[#35845]

Hey guys I have been doing some testing with my pixels. This is my first year with pixels. I have a pixelite16 that will run 12 strings of 75 2811 nodes for my mega tree and 1 string of 50 nodes for my star. I also have a holidaycoro 27ch dumb rgb board running 400 pixels. I am using 6 LOR 16ch controllers as well. I am planning on sequencing the dumb rgb's and LOR channels in LOR s3 advanced and sequencing the smart pixels in Nutcracker. I'm thinking that I will convert the LOR sequences in xlights and run my show from xlights (I have heard this is the best option). My dumb board is universe 1 and my pixelite16 is universes 2-6. I started sequencing in LOR and had it running on my computer so I could test the dumb rgbs. When I started testing the smart rgb's in Nutcracker they were going crazy. It almost looked like the shimmer effect in LOR. When I closed LOR out of my computer it was fine. What is causing this and will it affect my plan for how I will run my show? Thanks in advance.


8 Replies
james70818
Posts: 2045
(@james70818)
Noble Member
Joined: 19 years ago

Do you have XLights and LOR S3 open at the same time? If so that is most likely the issue. I haven't used LOR S3, but if I open bot Vixen 3 and my Falcon Pi Player I will get odd erratic flashing. The issue or cause is that both programs are sending signals to the controllers at the same time even if one is just sitting idle.

Just a thought.

James


Reply
Posts: 251
(@don-gillespie)
Reputable Member
Joined: 13 years ago

Yes unload LOR in the tool bar and then try xlights,


Reply
Robo
Posts: 1494
 Robo
(@robo)
Noble Member
Joined: 14 years ago

+1 that will fix it.


Reply
Posts: 34
(@imacericg)
Eminent Member
Joined: 15 years ago
Robo wrote:+1 that will fix it.

+1 agree


Reply
Posts: 374
Topic starter
(@mberta2)
Honorable Member
Joined: 13 years ago

That worked. Thanks guys. Another quick question. Should I sequence my show in LOR and convert to xlights and run my show from xlights? Or convert LOR to xlights then go back to LOR with the mega tree and star from xlights and run show from LOR?


Reply
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

You don't need to convert LOR at all to add a mega tree. Create your magatree in xilghts/nutcracker then import what ever effects you want to the LOR megatree.


Reply
Posts: 374
Topic starter
(@mberta2)
Honorable Member
Joined: 13 years ago
jcmarksafb wrote:You don't need to convert LOR at all to add a mega tree. Create your magatree in xilghts/nutcracker then import what ever effects you want to the LOR megatree.

I'm not following. Can you give me more details? How can I add 2700ch mega tree to LOR?


Reply
Posts: 251
(@don-gillespie)
Reputable Member
Joined: 13 years ago

Sequence in Xlights then convert your lor stuff to xlights and have xlights run your show, it will be quite some time before lor can run pixels at the pace they are going, that is why I switched and will never be going back.


Reply
Share: