Hi all - first time doing any sort of sequenced Christmas lights - starting to plan for 2014.
I plan having strings of pixels on roof lines, outlining windows and maybe framing the house along the gutter spouts etc. I am 99% sure I will be investing in Pixabulbs as I like the shape (look traditional) and have heard good things. The 12v I think will also be handy to allow me some longer runs between controller and strings.
After some research and help from board members, I am looking at the E682 for easy of use and future expandability. I am trying to determine the value of the Pixel System 1 vs a fully assembled E682 by itself. I do not mind the idea of putting some stuff together myself, doing some soldering of wires etc (however putting a board together from scratch is not in my realm of comfort).
What I am trying to determine is how much of the price difference between the two is materials versus convenience. Meaning if I get the E682 assembled ($180), purchase a power supply, enclosure, cords etc - will I be in the ballpark of the $399 for the "plug-and-play" Pixel System 1? Or is it better of me to get the E682 and piece together the remaining components for a significant savings?
Thanks,
Brian
The Pixel 1 system is really just an already built E682 with cabling and power supply in one box. If you have the time, you can buy all the same parts and do the same thing for cheaper.
$180 for E682
$ 50 for a pair of 350W power supplies
$40 or less for an enclosure and needed misc wire
IF you are going to have multiple E682's, I would build them myself. To build out a box took me about 2 hours making the holes and cabling everything inside the enclosure I bought. Nice thing is that I made it more waterproof than his design.
Good question Brian. You can save yourself a good bit of money building it yourself. The parts are all pretty cheap. Enclosure $20, cables $20. I bought a Pixel system my first year (last year) and bought the board separately this year. I was happy to save a little bit of money, but to be honest, if Jim sells prebuilt 6804 units I'd probably buy them prebuilt. I have an excellent hardware store just a few blocks from my home that is a godsend. They have probably a million screws of every size. One of the ugly things about building it yourself is just trying to get that power supply mounted in the CG1500 case. Most people use that case, but the problem is it has these plastic standoff parts stick up all over the place. So you need to get the "just right" screws, the right length to span the distance of those standoffs. And because I'm a perfectionist, I also used rubber gasketed washers similar to what Jim uses to keep the moisture out of the case as much as possible. You also need to be smart enough to know how to drill those 8 holes in the exact right place for both the power supply and E682 board to get them in the enclosure. Then you need to get all the female 4-wire leads. That is easy enough. Seems a lot of people here have been grumbling about buying pixels from Ray in China, but I've been happy with him and he is who I'd suggest to you. He will easily sell you the 16 wires, the problem is it's not actually that easy to get all 16 wires connected to the board, out the enclosure and zip tied down. it's a TIGHT fit in there and you need to be gentle with the board.
The more I think about it the more I think I'd probably just recommend you get the finished system. It comes down to what you want to spend your time on. I personally would rather spend the extra hours building sequences or building some custom lighted display component.
You are doing the right thing to have a successful 1st year. You are starting NOW...that is the most important thing. Next you've found this forum. It is a great resource and will help you bunch to get the right hardware (I LOVE the E682 controller btw) and get the software side set. I recommend you becoming a DIYC supporting member.
Enjoy 2014, -=Steve
Daryl,
When you do your tear down, how about a picture of your enclosure and setup.
Brian,
Congrats on making the leap to Pixels! If I can suggest anything I would say buy the raw components, don't bother with the E682, start with the E6804, about 1/2 the cost. The E682 addressing is a bit to take in, with the groups per channel it takes a bit to wrap your head around it and if just starting keep your life simple. An E6804, CG1500 and a power supply should be under $200, doesn't take much to mount them in a box and wire it together. DIYLEDEXPRESS, has everything you will need to get started. Get that and a string or 2 of pixels and start playing, once you see what it can do you will get inspiration for what you can do.
Good Luck
