Good morning/afternoon. This is my first year doing a Christmas show and first time post. I just purchased the Sandevices 16 port E682. In general everything is working great. Where i am having trouble is updating the firmware of the controller from 4.081 to 5.x.
what i am experiencing is really odd. I am using the fwloader_1_0.exe to attempt the update. I just ordered the Prop Plug hoping it will help. I rename the eeprom file to firmware.eeprom as instructed. The command line window opens and stays open for roughly 90 seconds. As soon as i run the .exe and see the "file found" i jump to the E682 GUI and click the Firmware Update button. I wait 3 minutes and click refresh and i ALWAYS see "timed out" for the firmware update status.
I have a dedicated VLAN for all of my "IOT" stuff including my FPP raspberry pi, my E862 controller and several WLED controllers.
I have assigned a static IP to the E862 controller of 192.168.145.49.
I have attempted the update going through my switch (LAN) with my laptop on the same VLAN/Subnet. Result is "timed out" on the firmware updte.
I have tried doing it with a direct connection between my laptop and the E862 controller. Same result "timed out".
I can do an arp -a on my laptop and the E862 shows up as expected so i know it is visible from my laptop.
I have no firewall between the controller and my laptop. No anti virus running, windows firewall is disabled.
Any suggestions would be greatly appreciated. If anyone needs more info please just let me know.
dwaynemccoy wrote:Good morning/afternoon. This is my first year doing a Christmas show and first time post. I just purchased the Sandevices 16 port E682. In general everything is working great. Where i am having trouble is updating the firmware of the controller from 4.081 to 5.x.what i am experiencing is really odd. I am using the fwloader_1_0.exe to attempt the update. I just ordered the Prop Plug hoping it will help. I rename the eeprom file to firmware.eeprom as instructed. The command line window opens and stays open for roughly 90 seconds. As soon as i run the .exe and see the "file found" i jump to the E682 GUI and click the Firmware Update button. I wait 3 minutes and click refresh and i ALWAYS see "timed out" for the firmware update status.
I have a dedicated VLAN for all of my "IOT" stuff including my FPP raspberry pi, my E862 controller and several WLED controllers.
I have assigned a static IP to the E862 controller of 192.168.145.49.I have attempted the update going through my switch (LAN) with my laptop on the same VLAN/Subnet. Result is "timed out" on the firmware updte.
I have tried doing it with a direct connection between my laptop and the E862 controller. Same result "timed out".I can do an arp -a on my laptop and the E862 shows up as expected so i know it is visible from my laptop.
I have no firewall between the controller and my laptop. No anti virus running, windows firewall is disabled.
Any suggestions would be greatly appreciated. If anyone needs more info please just let me know.
I always had issues doing it with fwloader. When you get the prop plug it’s a piece of cake. You don’t even need to rename the firmware upgrade. You don’t even need the controller webpage open to upgrade. If I recall with fwloader it changes the ip of the controller back to default of 192.168.1.206. Using the prop plug the ip doesn’t change.
Sent from my iPad using Tapatalk
That is what i hear. Heck, it can change the IP all it wants that is an easy fix. I cant even get it to transfer the bits to the board. It always shows 0 bytes. I hope the prop plug comes soon!!!
pmiller wrote:I always had issues doing it with fwloader. When you get the prop plug it’s a piece of cake. You don’t even need to rename the firmware upgrade. You don’t even need the controller webpage open to upgrade. If I recall with fwloader it changes the ip of the controller back to default of 192.168.1.206. Using the prop plug the ip doesn’t change.Sent from my iPad using Tapatalk
I just did 2 Sandevices recently and neither one wanted to upgrade the firmware through use of the fwloader program. I happened to still have my Prop Plug and just downloaded the software from Parallax and ran it from there. Super easy. If I recall, even if it says it timed out, just reboot your controller (or remove power and plug back in) and see if the firmware version has updated.
Stormyblade wrote:I just did 2 Sandevices recently and neither one wanted to upgrade the firmware through use of the fwloader program. I happened to still have my Prop Plug and just downloaded the software from Parallax and ran it from there. Super easy. If I recall, even if it says it timed out, just reboot your controller (or remove power and plug back in) and see if the firmware version has updated.
Never had an issue with timing out but the controller should be rebooted after a firmware update. Parallax makes it so much simpler and easier to upgrade or downgrade. I’ve downgraded a few times to help those who haven’t upgraded to 5.030.
Sent from my iPad using Tapatalk
when you tried the direct connection method (pc - ethernet - sandevice) did you make sure your wifi was turned off? I updated mine a few weeks ago and got the timeout error until i disabled the wifi. worth a shot
Sent from my iPhone using Tapatalk
Riley, i did. I turned off WIFI.
I had the same issue as dwaynemccoy. After experimenting around I was able to do a firmware update by clicking the "Update Firmware" button on the main page, then launch the fwloader_1_0.exe application. It did not take long for the update to complete.
