A bad pixel is possible but I've tried 3 different strings, 2 of which are new out of the package.
I upgraded to firmware version 4.08 last night and got the same results, no lights at all, before going to bed. It had been a long day! Today I'll upgrade to firmware version 5.030-1 and see if that is any help and I can disconnect everything from my 2nd controller and bring it in to verify some things. It will probably be later today before I can try any of this but I'll post the results once they're in.
Thanks to everyone for your suggestions!
kgwndw wrote:Trying to upgrade the firmware with the controller plugged into my home network but it keeps timing out.....
Had the same issue and upgrading to 5.xx has worked! Follow the directions on their site to upgrade as the file needs to be renamed and the firmware software needs to be launched before clicking on the update button in the browser.
Sent from my iPhone using Tapatalk
Hallelujah!!!! I upgraded the firmware to 5.030 and everything seems to be working now. I'll put everything back together and see how it goes. Thanks to everyone for the advice, tips, and pointers!
kgwndw wrote:Hallelujah!!!! I upgraded the firmware to 5.030 and everything seems to be working now. I'll put everything back together and see how it goes. Thanks to everyone for the advice, tips, and pointers!
you're welcome. Jim at sandevices seemed to work out all the bugs in 5.030
Sent from my SM-G955U using Tapatalk
