great information, thanks. No video needed, your right...just look at any c9's and there you go! I have all bullet pixels and have debated if these would really add that much to the show versus just the bullet pixels. I am not doing my roof outline, but rather eves, verticals, windows, porch posts, etc.
Following
Sent from my SAMSUNG-SM-G900A using Tapatalk
This was my first year, so I had a 'clean slate' to deal with... I picked the strips for my house outline. I attached the strips to 1/2" aluminum angle iron for a nice clean look. I'm still searching for a good way to attach them (I used command strips and zip ties this year, and I'm not thrilled with the outcome but it survived).
The singing elements and the 'trees' were all pixelbulbs. For what it's worth, I had zero failures. But I will be doing things differently next year.
For the last 4 Christmas' I have used 2801 5V bullet nodes with C9 covers over them with zero failures. Pictures tell the story but the lights are inside square ducting with holes drilled for a friction fit of the C9 covers. I have them below my gutters as pictured and on the gable ends and ridge.
And then they are stored on the ceiling of the garage in the off season..
Jon
Louie,
I like the bulb ornaments behind and to the right of your mega tree. Can you provide any details on construction? Technicolor bulbs as well or something else?
Thanks,
-Joni-
nutz4lights wrote:I use Ray Wu's technicolor bulbs. Videos are located at the link below. I am one of those old fashioned nuts that really likes the classical look of a true c9 bulb on the roof. I had the technicolor v1 bulbs that failed. Ray replaced those for me with the technicolor v2 bulbs that failed. I was one of the folks that helped Ray troubleshoot their manufacturing failure. He moved away from injection moulding the base to an epoxy filled setup. Because there wasn't another bulb comparable, i had Ray replace the v2 with the v3 at no cost to me. They have performed perfectly for two years now. 400 bulbs not a single failure.I tested the pixabulb at some point and although it was nice, it is simply not a c9. I suppose if the epoxy filled technicolor bulbs didn't work, i would have considered using the pixabulb, but they DID work and i didn't have to compromise.
Let me know of any questions.
Louie
Sent from my SM-G928V using Tapatalk
Joni,
Wireframe link below from Christmas-LEDS.com . Maybe someone could do it better and cheaper these days with coro but back in the day, we used wireframes for everything. I have had these for going on 10 years now. They used to have 35 LEDs of one color in the middle zig-zag section and 35 LEDs of another color around the perimeter, now they just have 70 ws2811 pixels, 12V, from Ray Wu. Pixels are zip-tied to the wireframe. I have used them like this for the last 3 seasons.
http://www.christmas-leds.com/productinfo_v3.aspx?productid=FR-07RO
-Louie
Hmmm I am planning on using PixaBulbs next (err this) year for my roofline. The kind with the shaft that I can use a conventional roof clip on them. Referring to these guys:
http://www.diyledexpress.com/index.php?main_page=product_info&cPath=42_59&products_id=344
Or so is my thought. Given all the concerns, I wonder if I should face them downward rather than up? We get some rain during the season usually but I was fortunate as I had no pixel failures once my show was online. I had one troll strand I had to end up replacing from last year for my smallish Pixel tree but after that, my 2 year old bullets ran without issue and all the new stuff worked like champs.
What spacing does everyone like for the C9 bulbs? 4,6,8 or 12"
Sent from my iPhone using Tapatalk
nutz4lights wrote:I tested the pixabulb at some point and although it was nice, it is simply not a c9.
Just curious what makes the PixaBulb less of a C9 than Ray's Technicolor Bulb? Wondering if you are referring to the PixaStrings not the PixaBulbs?
I have not had a failure of Pixabulbs in the previous three years, but this years batch I had two of the new ones fail. Still, they have been the most reliable of all pixel types I use. The two failures happened to be along the driveway, not the roofline. Not sure if that's a coincidence or not :hmm:
The shape of the bulb on the pixabulb isn't even close in my opinion to a historical / classical c9 bulb. Here is a picture that shows what i mean (let's see if this link works, I'm on my phone)
If that link doesn't work, try this video on my Vimeo site
The term "c9 bulb" refers to a shape of a bulb that goes back to the mid-1900s. I have nothing against pixabulb, but i wanted something that meets the shape of the c9. The pixabulb is more of a strawberry shape.
Louie
Sent from my SM-G928V using Tapatalk





