well this is the place i bought from, but its local http://www.usplastic.com/catalog/item.aspx?sku=38099&gclid=CNib1_zl0LoCFcae4Aod_RoAGw
I used toulene to thin and just used a paint brush(since they were strapped to pvc) and painted the whole string and pixel. i made to sure to get around the led b/c that is where water can get in. drys fast with the toulene and goes pretty quick. But make sure if you buy plastidip you buy this too http://www.amazon.com/Bloxygen-RBBlox-Finish-Preserver/dp/B0002088O8 b/c if you dont seal out the air, you will lose the whole batch of plastidip to hardening. works great been using for about a year with no issues.
But as for rays pixels being cheap, that is what they are cheap. we all know there might be some issues with water egress or some might not work. But if we wanted ones that we knew would be a slam dunk out of the box we would just buy minelon or stellascapes but at 4 to 6X the price. That is b/c they make sure there are no issues. ill deal with a lil extra work but it does suck when they start to go out. gamble i risk to take with cheap pixels.
sorry to hijack thread
Never heard of that Bloxygen before.. That looks cool.. argon gas in a can.. I have a MIG welder here with an argon tank.. wonder if that will work?
pythan wrote:Never heard of that Bloxygen before.. That looks cool.. argon gas in a can.. I have a MIG welder here with an argon tank.. wonder if that will work?
Probably much cheaper as well... The wine stores here sell something similar for the 'connoisseur' to spray C02 into the wine bottle after its been uncorked...Talk about a racket...something like $14 for .25 ounces of C02 in a can... But apparanlty people are buying it...
Uggg... I just bought 1000 of the 2811 pixels from ray:
http://www.aliexpress.com/item/promotion-DC5V-WS2811-controlled-12mm-diameter-led-pixel-node-50pcs-a-string-with-black-wire-injection/804958154.html
And I'm worried about water issues now. These will be hanging from 3/4" PVC upside down (wires sticking up) so now I'm afraid they are going to have waterproofing issues and water coming in through the wires. What sux is the fact that each pixel is dependent on the previous pixel and now I'm more reluctant to have 300 pixels/output on my P2 in the event a pixel goes out and wipes out everything downstream.
I've had perfect luck with the 2811 strips that are in the silicone tubing, not a single issue last year with ~500 pixels on my roof line and windows. Now these natually only have the possibility of water egress on the ends.
http://www.aliexpress.com/item/5m-led-digital-strip-DC12V-input-WS2811IC-256-scale-10pcs-IC-and-30pcs-5050-SMD-RGB/568458133.html
Those are his IP68 rated ones, epoxy filled, so you should be fine.
