This year I consolidated various props and am using a server supply that's 750 watts at 62.5 amps with a 12 volt breakout board. I also run everything at 25% so the supply will never get near it's stated output.
Sent from my SM-T710 using Tapatalk
pmiller wrote:This year I consolidated various props and am using a server supply that's 750 watts at 62.5 amps with a 12 volt breakout board.
If I may ask, how much of the 750 watts quoted is dedicated to the 12vdc rail? (Most server supplies are split between 12vdc, 5vdc, and sometimes 3vdc - both positive and negative feeds.)
algerdes wrote:If I may ask, how much of the 750 watts quoted is dedicated to the 12vdc rail? (Most server supplies are split between 12vdc, 5vdc, and sometimes 3vdc - both positive and negative feeds.)
I have no idea. All 8 outputs (technically there are 24 outputs) are reading 12 volts. Here's a pic of the breakout and power supply.

Sent from my SM-T710 using Tapatalk
If the label can be believed, that particular PS puts all 750 Watts out at 12 volts. Nice.
So where does one go to get such a beast? How about the adapter?
Here is the one I used on my megatree. I ran at 15% intensity.
Hmm cant seem to attach pic. It is a HP DPS1200 fb-a rated at 12v 75amps @110vac.
Pm me if you want a email of the pic.
