Pixels with 1024 br...
 
Notifications
Clear all

Pixels with 1024 brightness levels

15 Posts
7 Users
0 Reactions
608 Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
[#59027]

Are such beasts readily available at a not-too-dear price, and has anyone here played with them?


14 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Never heard of such a pixel


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

I vaguely recalled such a thing from quite a few years back, but I may be thinking of something else. The reason for wanting such a thing is to be able to have smoother dimming at low brightness levels. In my experience there is a pretty big jump in brightness going from level 1 to level 2 to ...


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I thought that's what dimming curves were supposed to solve, weren't they?


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

Solving this requires hardware support from the pixels. At the end of the day the controller sends 8-bit values to the pixel per color. If the pixel shows a visibly big jump in intensity going from level 1 to level 2 (for example), there is nothing that the PC or pixel controller can do to alter that.

The story is a bit different with AC lights. There the intensity of the incandescent or LED AC light string is determined principally by how long current is supplied to the string during each half-wave cycle. With the Renard AC light controllers each half-wave AC-cycle is divided into 256 fixed-length timeslots (some other controllers may have fewer or more timeslots), and each triac is triggered in one of the timeslots (hopefully at the beginning of the timeslot), and stays on untl the AC line voltage drops too low. However, there is not theoretic reason for the timeslots to all have the same duration, and as you may know, I've been playing with controller designs that provide variable duration timeslots (although limited to 256 in total, limited by the Vixen drivers). This allows the visible intensity levels to be closer together at low brightness levels and spread out at high brightness levels, while still providing 256 different levels in total.

Maybe I'm trying to gild the lily, and nobody (except me) would notice the issue. This might be because almost everybody sequencing likes big, bold, fast-moving shows. However, I would like to be able to do smooth, slow fades that are non-blinding.


Reply
Page 1 / 3
Share: