Pixels from Amazon
 
Notifications
Clear all

Pixels from Amazon

19 Posts
13 Users
0 Reactions
5,117 Views
Posts: 21
(@mfroez)
Eminent Member
Joined: 10 years ago

So far so good.

No complaints and so far no bad pixels.

Didn't notice any issue with epoxy.


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago
3 inch between light is pretty close to do anything else

My mega tree is 2 inches apart, looks great. My house outline will be 2.5 inches apart, made a sample string viewed from 40 ft, looks great.


Reply
Posts: 167
(@bigbenamerika)
Estimable Member
Joined: 13 years ago

I am using those with the White wires but the 5V Version from Ray Wu.
Now the third year without a single failure/ repair.


Reply
Posts: 20
(@calcprogrammer1)
Eminent Member
Joined: 10 years ago

I ordered a set of these:

https://www.amazon.com/gp/product/B01DZV3PNO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

At $45 per 50 lights they're pricy, but I wanted actual C9 style bulbs and they look great. I then proceeded to accidentally dial up my bench PSU to 12V and fried half of them 😐

I pulled on the base and out popped the normal epoxy coated pixel unit, so I am going to save the housings and replace the dead pixels with the much cheaper ones you can get elsewhere. Now I'm wondering if someone sells just the housings to stick your own cheap pixels in, because it doesn't seem right that the housings add so much additional cost.


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

You can buy the covers from ray on next order: https://www.aliexpress.com/store/product/smooth-milky-C9-covers-100pcs-set/701799_722366603.html
or you can have someone with a 3D printer print some off for you, I believe the design is on thingiverse under the Christmas lighting group (AussiePhil designed them I think).


Reply
Posts: 20
(@calcprogrammer1)
Eminent Member
Joined: 10 years ago

Oh nice! I do have a 3D printer but the clear filament I have isn't very good. I might buy the faceted clear covers from aliexpress to match the ones I already have, maybe I can print a base as well though it seems a base isn't necessary to clip into most roof and stake clips.


Reply
Posts: 113
(@randyr505)
Estimable Member
Joined: 18 years ago

I purchased 3 of these: 500pcs Black Wire WS2811 12mm Pixel 5v Round

At the time it was the cheapest I could find on Amazon to get here quickly. I didn't notice the others mentioned in this thread. I ordered the 12v but they shipped the 5v. They refunded me the difference and they all work great so I am satisfied.


Reply
Posts: 55
(@vavvoom)
Trusted Member
Joined: 11 years ago

Not sure what you mean 3" to close to do anything else? All the stuff I have from holidaycoro and Bosco in from strips to plastic signs is all standard at 3". Metatree strips all 1,2,3 inch spacing.

Did I miss something?


Reply
Posts: 5
(@christmasbug)
Active Member
Joined: 12 years ago
Reply
Page 2 / 2
Share: