Pixel Wire recommen...
 
Notifications
Clear all

Pixel Wire recommendation

27 Posts
19 Users
0 Reactions
8,459 Views
Posts: 116
(@studiopro)
Estimable Member
Joined: 12 years ago

Last year was my first year with pixels and I used Monoprice 16AWG 4 conductor speaker wire from Amazon. I mostly only needed the 3 wires, but I did make a couple custom power injector cables with all 4 conductors. It was the best priced wire I was able to find at the time. I was planning to buy some more to expand this year.


Reply
Posts: 86
(@markrvp)
Estimable Member
Joined: 19 years ago
Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Now I know why I stock up on green and tan extension cords. Prices are crazy on 100' of cable.


Reply
Posts: 138
(@brettjm)
Estimable Member
Joined: 13 years ago

I have also used 16/3 extension cords and can get up to about 20 ft. After that I had to use at least 1 null pixel. This year I am using cat5, 3 wires for power, 3 for ground and 2 for data and I have gone 30 ft to a prop with 126 pixels without a null pixel or power injection and have had no problems. Using an E682 and powering from the controller.


Reply
ThinkAgainAgain
Posts: 230
(@thinkagainagain)
Reputable Member
Joined: 12 years ago
brettjm wrote:I have also used 16/3 extension cords and can get up to about 20 ft. After that I had to use at least 1 null pixel. This year I am using cat5, 3 wires for power, 3 for ground and 2 for data and I have gone 30 ft to a prop with 126 pixels without a null pixel or power injection and have had no problems. Using an E682 and powering from the controller.

I've heard that splitting the data stream can cause problems. And, check the heat on those with power running thru 3 wires.


Reply
Page 2 / 6
Share: