Pixel Strip cutting...
 
Notifications
Clear all

Pixel Strip cutting question

15 Posts
8 Users
0 Reactions
5,202 Views
Posts: 151
Topic starter
(@pat2k3)
Estimable Member
Joined: 12 years ago
4586shaggy wrote:That is those specific pixels, not 12v pixels in general.

Im not sure I'm understanding you.


Reply
Posts: 1120
(@4586shaggy)
Noble Member
Joined: 14 years ago

INK1003 pixels, the ones you linked to use a built in convertor to switch from 5v/12v to go longer distances/have more pixels in a line without injection. Standard pixels other than that 2811 and 2801 are just 12v throughout the length of the string


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
pat2k3 wrote:From what I read though, is if I cut 12V strips.. the leds are actually only 5 volts, and Ill probably will be missing a 12v to 5v converter? Maybe I should simply get a 5v line in order to not run into this problem.

This is true of Ink strips, maybe others. It's a pretty new chip and not too many people are familiar with it. I like your idea of going to 5v and have more versatile strip that you need to pay attention to power injection. This is what I do also.


Reply
Posts: 972
(@dmoore)
Noble Member
Joined: 17 years ago
4586shaggy wrote:INK1003 pixels, the ones you linked to use a built in convertor to switch from 5v/12v to go longer distances/have more pixels in a line without injection. Standard pixels other than that 2811 and 2801 are just 12v throughout the length of the string

These strips (30/30 INK1003):

http://www.holidaycoro.com/INK1003-30LED-30IC-Pixel-Strip-p/717-white.htm

Do not have buck converters in them and they can be cut anywhere along the length.


Reply
hasoon
Posts: 520
(@hasoon)
Honorable Member
Joined: 15 years ago
dmoore wrote:These strips (30/30 INK1003):

http://www.holidaycoro.com/INK1003-30LED-30IC-Pixel-Strip-p/717-white.htm

Do not have buck converters in them and they can be cut anywhere along the length.

I know this is an old thread but yes these do have buck converters.

" Note that there is a "buck converter" that requires that you either cut at only every 7 pixels/LEDs or run the strip in 5v only without the buck converters."

I am working with a set of these right now and am trying to figure out how/where to cut and a google search got me here. I wish you were right.


Reply
Page 2 / 2
Share: