Pixel integrated Ci...
 
Notifications
Clear all

Pixel integrated Circuit & Pixel Types Question

7 Posts
6 Users
0 Reactions
2,517 Views
Posts: 155
Topic starter
(@l1011)
Estimable Member
Joined: 11 years ago
[#41596]

I've been shopping online for Pixels (Alibaba mostly) and am wondering why there are multiple protocols listed for a particular pixel IC. I'm still fairly new to this and want to make sure I understand what I'm buying.

For example, today I found this listed for the "IC Chip": WS2811/ TM1804/ 1903

Does this mean that the type of protocol sent to the pixel via the data wire determines the protocol the pixels will interpret? The reason I ask is that 1903, as I understand it, can technically talk WS2811, but 1903 has a much slower data speed (400Kbps as opposed to 800Kbps for "real" WS2811). I fear that I'm not really getting WS2811 but a cheap clone that uses 1903.

Here's another example: APA106 ws2801 ws2811 ipd8806

These pixels are quite a bit more money but I don't understand why.

Final question, what is an "F8 RGB" pixel?

Thanks!!!


6 Replies
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

The Wiki is your friend..
http://www.doityourselfchristmas.com/wiki/index.php?title=Different_Styles_of_Pixels#Pixel_.28IC.29Control_chips_and_number_of_wires

APA106/PL9823 is a WS2811 compatible with an annoying feature that when power is first applied..they all turn blue until the first bit of data is sent. Then they're fine.

An F8 LED has an 8mm diameter, F5=5mm.

-Craig


Reply
Posts: 66
(@mrsmith)
Estimable Member
Joined: 12 years ago

when ordering from alibaba be very weary of the prices they advertise. A lot of the time the suppliers will advertise very low prices and the actual price will be 3+ times what is listed. Another thing they might do is jack the shipping price way up. An example that happened to me is I placed an order that was roughly $800 but the shipping was over $1200.

A word of advice if you do purchase from them try to conduct all your communication on the site and pay through PayPal or Alibaba Trade Assurance this way you're protected if they don't ship or it is seized at customs for some reason or they just mis represented the product you ordered.

Mark


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Ws2801 is a four wire pixel, the forth for clock signal. Ws2811 is three wire and totally different protocol. So advertising these together is a lie. Keep to known vendors and even then be careful and ask questions.


Reply
beeiilll
Posts: 869
(@beeiilll)
Prominent Member
Joined: 19 years ago
Reddy_Kilowatt wrote:The Wiki is your friend..
http://www.doityourselfchristmas.com/wiki/index.php?title=Different_Styles_of_Pixels#Pixel_.28IC.29Control_chips_and_number_of_wires

APA106/PL9823 is a WS2811 compatible with an annoying feature that when power is first applied..they all turn blue until the first bit of data is sent. Then they're fine.

An F8 LED has an 8mm diameter, F5=5mm.

-Craig

Not sure why you say that the APA106 "turn blue until the first bit of data is sent" since I have a few hundred of them and they don't do that? I have been running them and using for over a year now and have never seem them come on blue.
I have never looked at the PL9823 so can't say as to them.

Just Sayin'.

I do agree with being watchful with what you are looking at though and ask a lot of questions if necessary. It can be daunting to order from China direct and probably better to stick with the WS2811 type of pixels for now as they are well supported by many users and groups and there are quite a few US suppliers to buy from.


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago
beeiilll wrote:Not sure why you say that the APA106 "turn blue until the first bit of data is sent" since I have a few hundred of them and they don't do that? I have been running them and using for over a year now and have never seem them come on blue.
I have never looked at the PL9823 so can't say as to them.

Just Sayin'.

I don't know about APA106 strings... The OP was asking about F5/F8, round and straw hat LEDs in other threads. So I guessed that he was inquiring about the pixels below:

http://www.aliexpress.com/item/APA106-F5-5mm-round-hat-RGB-LED-with-APA-106-chipset-inside-full-color-frosted/2043991484.html

I just got done daisy chaining 600+ of those silly sap suckers for some DIY rope light and they most defiantly come on blue... 😛

I originally bought a few PL9823-F5 & F8 pixels to try. Switched to APA106 hoping they would not have the same issue. They did..

-Craig


Reply
Posts: 326
(@jsheehan3)
Honorable Member
Joined: 17 years ago
beeiilll wrote:Not sure why you say that the APA106 "turn blue until the first bit of data is sent" since I have a few hundred of them and they don't do that? I have been running them and using for over a year now and have never seem them come on blue.
I have never looked at the PL9823 so can't say as to them.

Just Sayin'.

I do agree with being watchful with what you are looking at though and ask a lot of questions if necessary. It can be daunting to order from China direct and probably better to stick with the WS2811 type of pixels for now as they are well supported by many users and groups and there are quite a few US suppliers to buy from.

Hey there Bill, my buddy just received a bunch of these (ordered because he wanted the smaller size). What's the secret to getting them to go. What type of controller/settings are you using. As soon as they received power...they turned blue.

Thanks


Reply
Share: