Notifications
Clear all

Pixel Help

4 Posts
3 Users
0 Reactions
8,063 Views
Posts: 20
Topic starter
(@soccertopher)
Eminent Member
Joined: 10 years ago
[#46544]

I recently purchased a lot of these bullet pixel lights (1000pcs DC12V WS2811 IC LED Modules String Light 12MM Full Color IP68 Outdoor Waterproof Advertisement LED Pixel Lights) and for the life of me I can not get them to work on my E682 at all. I've verified that they channel I have on my E682 is working by plugging my arches that I built last year into it and they power up fine. I've checked the wiring 5 times to make sure I have 12 volts and that the DI line is connected to the board. When I plug the lights in the first pixel will flicker, but when I try and place the E682 into test mode it does not cause the pixels to turn on. Looking for any help please 🙂

IMG 4027

3 Replies
Posts: 20
Topic starter
(@soccertopher)
Eminent Member
Joined: 10 years ago

Well I got them to work. I updated the firmware in my E682 board and they started to work. Not sure why, but I'm happy!


Reply
Posts: 274
(@akareaper)
Reputable Member
Joined: 10 years ago

Its because they changed the IC chip inside, and multiple controllers needed firmware updates, which you figured out already, lol.


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The new chip extended the frame start time. The software update added the longer frame start time and now the new pixels work.


Reply
Share: