algerdes wrote:They are not interchangeable. XConnect has the nut on the female side where Ray's is on the male. DIYLEDExpress is a total different size.
Thanks. I have always wondered what the difference was but couldn’t find it. All I have so far are DIYLEDEXPRESS and some dumb RGB from Christmas in July before he quit his business. I mark all my strings for where they go so I don’t need interchangeable but it would be nice to be able to buy new ones at different places if I need to get something at the last minute.
Sent from my iPhone using Tapatalk
I have standardized on Automotive Waterproof Connectors They are interchangeable between vendors, come in 1 pin to 6 pin configurations, and I can disconnect them One Handed with gloves on in the cold. You can get them from Amazon, Ebay, or direct from China. It does pay to shop around for these as the pricing will vary from source to source. I will use the vendor supplied connectors when connecting strings within a prop, but will use these connectors to connect to controllers and Power Injection.
Thats all i use also 3 pin for pixels, 2 pin for power, but i get mine without the wire and crimp them on, NEVER had a failure with these, and i an in the Chicago burbs, hot , cold, rain, sleet, snow , ice ,,, all in the same day.
Wired Watts has a good description of the different connectors at: https://www.wiredwatts.com/learn-connectors
X-Connect is quickly becoming the "standard" from the different vendors.
One of the things I don't understand about the xconnect connectors is why the nut is on the female side of the connector. This basically prevents female panel mounts.
When plugging things in, it is generally a female connector on the source side and the male connector on the load side. This is done to prevent having exposed contacts that may have voltage on them. The wall mount connector would be female with an external thread and the male connector would have the female nut on it. Because of this, it is most likely the reason that Ray Wu connectors only have a female cap as a male cap would be unnecessary in connecting things together.
As I am planning to do my first pixel purchase, I am struggling to figure out which connector style to buy. Electrically it makes most sense to buy the Ray Wu connectors. I plan on using panel mounts on the side of my cases because it makes it easier to store them without having pigtails hanging off them. The only problem is I don't think Ray sells them(at least I haven't emailed him yet to find out).
EDIT: Ray confirmed that he does not sell female panel mounts for his Ray Wu connectors and referred me to the xconnect male panel mount.

