Notifications
Clear all
Nov 12, 2023 6:15 pm
I investigated a little further. Some pixels on the string twisted and were upside down. The pixels were on C7 stakes, but I ran over one with a lawnmower (not running....), and broke a stake. It still looked ok, so I didn't care. But then the rain came, and water pools in the epoxy if it's upside down. Just can't do that. If pixels are to be upside down (especially 12v), they need a little dab of extra epoxy, or it's a fire risk if the China epoxy fails to stick at all. These pixels were set up in September (for Halloween), and they soaked up a lot of UV. That can get brittle, fail to adhere to the wire, and pop open from underneath.
Page 2 / 2
Prev
