Multiple smaller co...
 
Notifications
Clear all

Multiple smaller controllers or single large controller?

23 Posts
16 Users
0 Reactions
13.2 K Views
mikel3332
Posts: 153
(@mikel3332)
Estimable Member
Joined: 16 years ago

I am running with all Espixelsticks and Pixelpop Tinys, love em, I don't think I would ever go to a large controller


Reply
Posts: 59
Topic starter
(@arange98)
Trusted Member
Joined: 12 years ago

Many thanks for the replies. It certainly helps to hear from experienced users before making a decision.

Cheers!


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

so i have four large controllers and three small controllers. started with all small controllers and then my show ate steroids (and money) and grew. my answer is: it depends.


Reply
Posts: 84
(@ajr214)
Estimable Member
Joined: 8 years ago

I'm not new to decorating, but new to the pixels and controllers. I won't make my show this year, but will be ordering, building and playing with stuff to be ready for next season. I also want to have the house trim up year round, and also have a screened in pool and want controllable lights year round as well (I'm in Florida). So I figure I'll be running a controller most nights all year, then change the programming for the season.

Anyway, I thought about the Falcon F4v3 controller... but now am looking at buying the Falcon F48 Differential controller with 5 Differential Receiver boards to start with. I figure 1 receiver using 2-3 channels for the front house trim and 1 receiver using 2 channels for the pool area. The other 3 boards will give me 12 (plus the extra 1-3 not used) channels for next Christmas. This will give me the flexibility to run Cat5 around the house and yard to the smaller receiver boards. If I find an area that requires a lot of channels (Mega tree and large matrix probably), I will get the F4v3 and tie it together with the F48. I don't do small and I'm finally in a house that I can light up again... this time with extreme flare! I have found so much useful information here!


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

I currently have 5 E682s. I like the boards and am familiar with them. The pixel thing is so complicated that I figure if I have to spend a few extra bucks and "waste" some channels for ease of implementation then so be it. It is the cost of doing business for me. KISS, as much as possible anyway.


Reply
Page 2 / 5
Share: