Dittos to Wolfie.
Once you define the layout, you don't need to touch universe numbers again. It's all props.
Some do multicast because it makes more sense to them. In that case, all universes have unique numbers (unless you have some unusual custom designed config and really know what you're doing).
I use unicast because it makes the most sense to me. I have 4 LOR boxes. I set them all to "unit 1" and connect them to a port on my E1.31 Bridge. Each is direct connect with no daisy chaining. I waste universe channels but I'm not worried. I have 2 E682's and start their universes at 1. The IP address keeps things straight.
I like Wolfie's practice of naming his E1.31 boxes with the last octet of the IP address. The first 3 octets are fixed across my show so instead of saying E682-1 and ESPStick-1, I will change to E682-210 and ESPStick-231. That makes sense to me and assists using IOs and Android apps to inject E1.31 data for testing.
If i had two or more bridges i would set them up as; 206 bridge universe 61,62,63,64 207 bridge universe 71,72,73,74,75 or something to that effect.
