Notifications
Clear all
Nov 05, 2012 9:50 pm
kingofkya wrote:also works as a great replacement for the 3m sticky hooks. You just have to be carefull it will take paint off the 3wall if adhesion of paint to dry wall is bad.
that is correct ....the adhesion is usually subjected to strengths as strong as your paint 😉
Nov 05, 2012 10:01 pm
i tired the 3m stuff and while it sticks to the brick it will not stick to the pixel strip. where can you get the clips that fit in the mortar joints
Nov 06, 2012 12:12 am
You coudl away wrap it around the pixle clip so it sticks to itself.:)
Nov 06, 2012 1:00 am
http://www.thistothat.com/ doesn't have mortar/brick, so I'm out of ideas... glad others got you some information. 😀
Nov 06, 2012 12:20 pm
Could build a wood frame and friction fit to the inside of the window frame. I have these frames for many years now w/ minis stapeled to the frame. I use a long wire tie on top secured to the frame, open the top section of the window and pull the tie in shutting the window on it. Holds great.
