Notifications
Clear all

mounting help

11 Posts
8 Users
0 Reactions
5,861 Views
Posts: 161
Topic starter
(@teddy)
Estimable Member
Joined: 16 years ago
[#21846]

i have hit a snag in my mounting plans for my pixel strip. the wooden parts of my home i have been able to use the rubber clips that came with the pixel but i have two windows i want to frame out that have brick around them. i tried to double stick tape, hot glue and other glues i have lyeing around but nothing seems to stick to the back of the pixel strips silicone tubing.

im out of ideas and looking for help.


10 Replies
kingofkya
Posts: 2165
(@kingofkya)
Noble Member
Joined: 15 years ago

http://www.3m.com/product/information/Scotch-Indoor-Outdoor-Mounting-Tape.html

This stuff is made for things like brick. Its almost putty like.


Reply
chelmuth
Posts: 1077
(@chelmuth)
Noble Member
Joined: 16 years ago

That's some good stuff.. used to use it on my RC gear to hold receivers in... It STICKS


Reply
Posts: 322
(@rklarman)
Reputable Member
Joined: 18 years ago

I have purchased clips that fit in the mortar joints. They clip in and expand assuming the joints are deep enough.

I also have built frames out of 1x2s and mounted the lights to the wood. This makes for easier setup and take down.


Reply
kingofkya
Posts: 2165
(@kingofkya)
Noble Member
Joined: 15 years ago
rklarman wrote:I have purchased clips that fit in the mortar joints. They clip in and expand assuming the joints are deep enough.

I also have built frames out of 1x2s and mounted the lights to the wood. This makes for easier setup and take down.

also works as a great replacement for the 3m sticky hooks. You just have to be carefull it will take paint off the 3wall if adhesion of paint to dry wall is bad.


Reply
Page 1 / 3
Share: