Hello I just purchased a f16v3 controller and am having a problem and wondering if someone would be able to give me some insight. I just built a 50 x24 matrix display every thing seems to work but my image is in reverse the reason I know this is because my texts are displaying backwards. *I have 100 pixels with a zig count of 50 *using 1 universe for each port . I have it set for reverse direction I tried forward and was not displaying very well kind of like a distorted image but still in the wrong direction. Not sure if this is a controller issue, wiring issue, or a sequence issue
quefol wrote:Hello I just purchased a f16v3 controller and am having a problem and wondering if someone would be able to give me some insight. I just built a 50 x24 matrix display every thing seems to work but my image is in reverse the reason I know this is because my texts are displaying backwards. *I have 100 pixels with a zig count of 50 *using 1 universe for each port . I have it set for reverse direction I tried forward and was not displaying very well kind of like a distorted image but still in the wrong direction. Not sure if this is a controller issue, wiring issue, or a sequence issue
are you using xlights? if so set it up with start top left.
Sent from my SM-G955U using Tapatalk
No I'm using light o rama
LOR uses standard bottom left corner as the start, bottom left as if you were facing the front of them matrix.
Thanks I turned my matrix around and everything is good now. I thought if I were to reverse direction in the f16v3 it would work as well. I guess not
