LOR Pixels using Fa...
 
Notifications
Clear all

LOR Pixels using Falcon Controller

4 Posts
3 Users
0 Reactions
5,577 Views
Posts: 17
Topic starter
(@ed26105)
Eminent Member
Joined: 13 years ago
[#48238]

I have LOR pixels and C9 lights that I would like to use with Falcon controller. I know the lights are 5 v, 2811 chipset. But can't seem to get them to work. It looks like wires +5V, Data, Clock, Grd, looking down at wire going into pixel. Can anyone confirm, and let me know if possible. It seems to would be easier to use Falcon than the various controllers from LOR.


3 Replies
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

How do you know they are 2811 chipset? I looked up the datasheet for WS2811 and there is no clock line so unless there is another variant I would assume a different chip type. Maybe experiment with one of the other chip selections in the Falcon setup. You connected up the clock right?


Reply
Posts: 17
Topic starter
(@ed26105)
Eminent Member
Joined: 13 years ago

Sorry, I meant 2801. wasn't thinking and typing clearly.


Reply
Posts: 401
(@kensington)
Reputable Member
Joined: 11 years ago
ed26105 wrote:Sorry, I meant 2801.

And which Falcon controller? And at what voltage are you running the controller? 12v off the board into 5v pixels would be an obvious reason why the pixels won't work. I say that from experience.:cry: And have you configured the string port for 2801? As I recall, default is 2811.


Reply
Share: