LEDancer - Tec Fac...
 
Notifications
Clear all

LEDancer - Tec Factory ?

9 Posts
4 Users
0 Reactions
3,314 Views
Wolfie
Posts: 2225
Topic starter
(@wolfie)
Noble Member
Joined: 11 years ago
[#40990]

I ran across these on youtube today.

Programming?

Unfortunately I don't speak German so I have no idea what they are saying. But, I can certainly see something like this being freaking awesome on a house or on the ground for a display. Provided you could sequence them. Anyone hack these things up?

I think they could be fun if you could make them out of 2811 chips driving high output LEDs. It looks like they use discrete R, G, B and W LEDs. I would love to see them with high output RGB pixels. Thoughts?


8 Replies
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago

Wouldn't be too hard to build our own. They are just narrow beam width LEDs that are not diffused. Judging by how dark the room is in the video, that are your run of the mill 20mA per color RGB leds.


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Hi, this is actualy the prototype for a clock but would do the same thing. Its at 10% brightness so I could photo it.
ESP8266 driving 30 x 5V WS2812. Runs on 4.2V with a diode to drop the voltage for the ESP. The pixels are fine with 3.3v data (it's more than 0.75 Vcc).

IMG 0590

It will only let me upload one photo links to others.


Clock code https://github.com/chrismelba/NTP

Works fine with the ESPixelstick code and you can sequence with Vixen of Xlights.


Reply
Wolfie
Posts: 2225
Topic starter
(@wolfie)
Noble Member
Joined: 11 years ago

I was thinking these guys here...
https://www.superbrightleds.com/moreinfo/through-hole/rl5-rgb-clear-tricolor-led/298/

Should be able to drive those direct off ws2811 boards IIRC which are 20ma CC out.


Reply
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago
Wolfie wrote:I was thinking these guys here...
https://www.superbrightleds.com/moreinfo/through-hole/rl5-rgb-clear-tricolor-led/298/

Should be able to drive those direct off ws2811 boards IIRC which are 20ma CC out.

Yep, they key between the original post and Barnabybear's cool clock is the beam pattern. 5050s are rather flood-like, and those dancer pucks are using narrow focused light. Though I wonder if they will look good on a house, outside and from a distance. These video are in a pitch black room and up close.

Does anyone know of higher power LEDs with narrow beam width?


Reply
Page 1 / 2
Share: